See what our Experts say about this Deka Wiring

• Does Optronics Clearance Light # OPT53FR Use Bullet Connectors
  Hey Trice, yeah the Optronics clearance light part # OPT53FR that you reference does use bullet connectors. They are the 16-14 gauge size like the part # DW05712-1.
  view full answer...
• How To Wire In A Camper Shell Third Brake Light On A 2021 GMC Sierra
  Hey Dan, To wire in a camper shell third brake light you'll need the 3rd Brake Light Logic Module # PP20-702 you were looking at and you'll need to splice into your Sierra's left and right turn signal functions. You'll need to pop the tail lights out to gain access to the wire harnesses and can then use a tester # PTW2993 to see which wire lights up when the turn signal is on. Once you find both the left and right turn signals you can use a butt connector # DW05744-5 to secure the wiring....
  view full answer...
  
• Availability of Replacement Bullet Connectors for Trailer Lighting
  Sounds like you are looking for bullet connectors. For that we have the part # DW05712-1 for the male side and part # DW05729-1 for the female side.
  view full answer...
• Replacement Flexible Brake Line For a 1999 Four Winns Single Axle Boat Trailer With Removable Tongue
  Typically these types of trailers will use a flexible line like the Kodiak # bh-3mfs-1-5 inside the removable or folding tongue. You will need to measure the length of hose needed as this line is 18" overall with 3/16" fittings. Please let me know if you need a longer or shorter length or have different fitting sizes as I have no way to know what Four Winns put on your trailer. The same goes for the wiring harness. I need to know if the wiring goes to a junction box or if they use push...
  view full answer...
• Solution for Connecting 7-Way Adapter to 2011 Ford Ranger
  If your 4-way has a much larger connector to allow the part # 30717 to install then you could either replace the 4-way on the vehicle with # 18252 then plug in the 30717, hardwire the # 30717 (but then you wouldn't have the option for a 4-way), or hardwire the part # 37185 instead as it has both a 4-way and a 7-way.
  view full answer...
• Can I Use the Deka Snap Plug to Connect to a Trailer 5 Way Flat Connector
  I went to the warehouse and pulled the Deka Wiring Snap Plug # DW05712-1 to test with a 4 way vehicle connector and even though it looks like they might fit together, they do not provide a secure connection so you won't be able to use this to wire your reverse lights. For this reason, in order to have the reverse lights on your trailer function properly you'll need to replace the 4 way on your trailer with a 5 way like the Hopkins Endurance 5-way Flat Trailer Connector # HM47910. The good...
  view full answer...
• Can Bullet Terminals Be Placed on Heating Element for Camco Propane to Electricity Converter
  Yes, you could place bullet style electrical quick disconnects on the heating element that comes with the Camco Propane to Electricity Converter for 6-Gallon RV Water Heaters part # CAM11673. That said, you'd need to make sure the terminals are rated appropriately for the wattage and wire size used on the element. I recommend the Deka Wiring Snap Plug part # DW05712-1 and Deka Wiring Snap Plug Receptacle part # DW05729-1. It's a 425 watt heating element so at most you're looking under 4 amps.
  view full answer...
• Reverse Circuit Wire for 5-Way Boat Trailer Connection
  I recommend installing the Curt Trailer Connector Adapter # C57187 as this will allow you use the electric reverse lockout that is on the trailer rather than having to insert and remove the manual lockout when you do back up. And in the future if you tow a trailer that may not have a manual lockout the electric lockout may be the only option. The Blue Wire # DW02414-1 connects to the Adapter # C57187 with the Snap Plug Connectors # DW05729-1, and # DW05712-1.
  view full answer...
• Parts Needed to Tie Light Bar Into Reverse Light Circuit on a 2018 Ford F-150
  The Rampage SuperBrite LED Tailgate Light Bar # RA960134 that you purchased has a 4-Way Flat connector on it which receives the stop, turn, and tail signals from your 2018 Ford F-150. If you are wanting to also tie in your reverse signal then you will want to use 16 Gauge Wire # 16-1-1 along with quick disconnects like parts # DW05729-1 and # DW05712-1. I also recommend using Butt Connectors # DW05744-5 to splice into your reverse light circuit. Please note that this light bar was not...
  view full answer...