Hey Thomas, the RVIA code is that everything above the belly pan of the RV has to be copper until you reach the appliance. Rubber would be easier though wouldn't it?
I may have a solution for you but I'm not aware of a bolt on safety chain bracket or clevis that can be used. However you can simply take a safety chain set (or your existing chains) like the 42" Long Safety Chain with 3/8" Clevis Hook…
Hey Karena! Just like the #MA97MV and #MA67MV the difference is in the pins. The T-Strap Hinge for Trailers #MA57MV actually has a pin head on both ends so it can be used in any orientation.
The Bulldog Gooseneck Coupler Head Repair Kit #BD1542S01 is specifically for the #BDGN240200 coupler head. This is the Bulldog GN24 which is the same as the Fulton GN24.
Hi Cody; the TecNiq Low Profile Stop Tail Turn Light with Reverse #TN22TR you were looking at is a good option assuming you can attach the lights on the guide poles. These measure 15-1/2" long; 1-1/4" tall, 1/2" deep and mount on the…
I called my contact at Buyers Products and they informed me that the Buyers Products Welded Mount Lunette Ring part #337BDB125015W is 5-1/2" x 5-1/2" and the mounting holes are all 4-1/2" apart top to bottom and side to side. I have…
On your 2014 Ford E350 Van with the factory towing package the brake controller port should be located behind the center of the dash above the stereo. You will need to remove the center panel above the stereo and to the left. Once it is removed there…
The Prodigy P2 part #90885 would be a really great option for your 2006 GMC C6500 that has hydraulic brakes. This is widely considered to be the nicest and most reliable controller that would work great for you.
Your trailer brakes will still work with the assemblies mounted upside down where the magnet is above the spindle, but from the customers we know who have done this we have found that the stopping power won't be as strong as if they were mounted…
To convert the WFCO WF-8955PEC to be lithium compatible you'd need the part #PD4655V and you'd be set. This fits in the panel without any modifications.
Yes, you can replace your slipper springs with double eye springs. The Double-Eye Spring #e27SR measure 26 inches from center of spring eye to center of spring eye and would work for you; these have a 2,250 lb capacity each though you will need to…
Hey Brett. You won't need a bushing on the open of a slipper spring, but the 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles - 26-1/4" Long #EM98AJ does indeed come with the built-in nylon bushing on the eye end, so…
Filters
