Hey Johnny, thanks for reaching out. I am happy to look this up for you, but I will need the model number and serial number from your axle in order to get you accurate bearing/ seal info. Drop that info in the comments below and I am happy to send…
Hey Chris, yes we do have a matching right hand side to the part #K23-532-00 with the part #K23-533-00. This fits the AL-KO/ Hayes axles, is that what you have?
Hey Tom, it looks like you can use the Hub-Piloted Solid Center Wheel w -0.5" Offset #AM32NR. This wheel is black in color, has the same 17.5 x 6.75 size as your current wheel, and has an 8 on 6 1/2 bolt pattern.
In order to account for the new tire and wheel size, you will want to take a few measurements. A 16.5 x 6.5 - 8 wheel is 5.3" wide with an overall height of 16.5". A 18.5 x 8.5 - 8 wheel is 7" wide with an overall height of 18.3".…
Jim, we do have replacement safety chain loops but since I don't know what Gooseneck hitch you have you'd have to choose one from the list below: - For B&W #BW1900-2-1600, - For Curt #C60691, - For Draw-Tite #58312, & For Reese…
Trailer or automotive wheels can have a positive or negative offset. The offset refers to the distance between the mounting surface of the wheel that touches the hub and the center line of the wheel, as shown in the diagram I have edited for you. A…
Yes, Pat, the Hub-Piloted Solid Center Wheel w -0.5" Offset - 17-1/2" x 6-3/4" #AM32NR wheel will fit with your 235/75-17.5 tire size. The last set of digits in the tire size indicate the wheel size that your tire is compatible with.
Hey Jack, If you're talking about a transition plate then you'll want the etrailer Enclosed Trailer Transition Plate #e32JR. This can be installed on either end of the ramp to help make the transition onto easier or at the hinge of the ramp…
The correct replacement brake assemblies for your B44EA-22 is the part #AKEBRK-35-SA which is for a 3,500 lb axle and is self adjusting. Then for a matching hub/drum that has a 6 bolt pattern on it you'd need the #AKHD-655-35-K and you'd be…
Hey Kip, do you know more of the specs on the wheel you need? The part #AM22704 is a 17.5 inch wheel with an 8 lug bolt pattern and a -.5 offset. I also attached a link to all of the 17.5 inch wheels we offer as well.
You shouldn't have any voltage on your brake controller output at the 5 o'clock pin when the brake controller isn't engaged. It sounds like you either have corrosion completing a circuit, a short that is drawing power from another…
In order to charge an on-board trailer battery you'd need to have a seven way connection on both the vehicle and trailer, this would contain the necessary circuits to pass a charge from the vehicle battery to the trailer battery. If you don't…
Filter Results
