Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
There is a suspension enhancement option for your 2021 Entegra Vision XL built on a Ford F-53 chassis, but I verified with the manufacturer that the steering stabilizer only fits if you have at least a 24,000 lb GVWR. You're not out of luck…
view full answer...To replace/upgrade the bushings on the rear factory sway bar of your 2009 Class A Newmar Canyon Star RV you need one of the following Roadmaster kits based on the diameter of your factory sway bar: - 1-3/8" Diameter #RM-4139-300 -…
view full answer...To flat tow your 2021 Jeep Wrangler Unlimited 4Xe Rubicon Hybrid you will need a tow bar, base plate, tow bar wiring kit, braking system, and safety cables. I have the following recommendations for you listed below: Tow Bar: Roadmaster Nighthawk All…
view full answer...I would be happy to gather a list of parts to help you flat tow your 2023 Jeep Wrangler 4xe. I have listed the ones you will need below and included any installation videos we may have: Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item…
view full answer...Your 2022 Entegra Vision XL 34G is built on the Ford F53 chassis. There is not currently a steering stabilizer available for this. However, we do have suspension enhancements available that can improve your ride and drivability. I highly recommend…
view full answer...The mounting plate for the Roadmaster Rear Anti-Sway Bar Item #RM-1139-149 will be attached to the U-bolts so you'll be able to look at the U-bolts and see if there's going to be enough to threads to place the plate on and retighten the nuts.…
view full answer...Some of the bushings on the Roadmaster #RM-4139-125 will need to be pressed in, but it is not overly difficult. I included an install video we have of a similar Roadmaster kit that will show how this needs to be done.
view full answer...The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…
view full answer...Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…
view full answer...On the Dexter Trailer Hub & Drum Assembly, part #8-174-5UC3, the wheel studs are a screw-in stud. The wheel stud would be the Trailer Hub Wheel Stud, part #25-11. This is a 9/16 inch stud that has a total length of 3 inches.
view full answer...According to the online owner's manual for the 2018 Ram 3500, the fuses related to trailer lighting and trailer power are below. The fuse location, fuse value and function are listed for you. F81 20 Amp Yellow Trailer Tow Right Turn/Stop Lights…
view full answer...I will be happy to explain how to install the shock kit #LC281281. In addition to the instructions below I have also included a picture of the actual instructions. 1. Raise trailer and jack up the axle to release pressure on the springs. 2. Remove…
view full answer...Related Searches
Filter Your Search
Contact and Help