Result:

Hello, I own a 2011 Toyota Highlander Limited with a factory installed tow package/hitch. Im looking to purchase a 2022 Keystone Springdale Mini 1750RD. I would like to purchase a weight distribution/sway bar but the options are overwhelming....

See thread below from a previous question. I have the Moryde 3000 equalizer and I see that the reccomended unit wont work. What are other options to correct this condition? | I do still have a few options for lifting the trailer but the Correct...

I have an enclosed trailer that I haul a small car in, with a combined 5400 lb. weight. Since I dont have a tongue weight scale, I am estimating the TW to be around 700 lbs. and the trailer sits very level when connected to my truck. Also, the...

How many hanger extensions come with this? The picture and description says 8 but it seems to me that 12 are needed for a tandem axle trailer. | The Correct Track Trailer Alignment and Lift Kit - Tandem Axle # RR23QX does come with all of the...

I bought a brand new unit from camping world. They sold me the e2 round bar 10k/1k system. The trailer uvw is 8750. Tongue is 1175. I told them it seemed under rated at the bars don’t make even 50 contact with l brackets. Would the trunion...

Are the moryde style wet bolts long enough to use with the correct track lift kit? | If you install the Correct Track Trailer Alignment and Lift Kit # RR23QX it will require longer bolts but MORryde makes a kit specifically for this. To find...

It mentions buying an additional part to get the 2-1/4 lift in the highlights. What part is that? | Hey Richard, great question. To get the full 2-1/4" lift on a tandem axle setup, you actually need the triple axle kit part # RR55QX instead...

Why are some Spring Hangers for Correct Track longer than others? | The hangers will vary depending on the exact suspension set up from the manufacturer. With different spring combinations and number of axles used this will cause different parts...

I have a Jayco 2018 5th wheel with MORryde CRE3000 suspension. I am towing with a 2021 F250 4X4 Crewcab 6.9 Box with autoslide hitch I got from you. I need to raise my trailer by about 2 inches. I am confused with all the options, need help....

I have a 2022 GMC Sierra 2500 4WD and a brand new Grand Design Reflection 150 Model 270BN fifth wheel with a BandW Companion hitch. I’ve only towed the fifth wheel one time from the dealer to the storage facility but the trailer sits high in...

I recd the Curt Hitch Extender, 8inch long. My question is about the 3500lb GWTowing number. This piece is being used to support my travel trailer hitch that is rated 12,500 lbs. Just wanted to make sure my intended use is acceptable while pulling...

Hi, I am looking to get more height space between the tire and the wheel well out of my travel trailer, can i flip the shackles so they are opposite of the way they are now, to gain more room? All the videos and pictures show the shackles installed...

Lifting a 2020 Grand Design 260RD Fifth Wheel Trailer Hello, I am confused as to what product to purchase in order to get another 2 inch of lift on my trailer so that I can level it out with my new GMC 2500. | Thanks for reaching out! To lift...

Hi, I have just purchased a used 6.4x12 single axle utility trailer with 5 on 5 15inch wheels. I am wanting to replace the hubs with your 5 on 5 pregreased hubs. I havent taken the old hubs off or apart yet because I am unsure of the axle weight...

Whats the best option to raise rear of trailer? already has flipped axle or spring on top of springs was stock. My 5th wheel hitch is 17inch from floor of bed its a Curt 20K slider and is already at lowest setting. Buy a lower hitch ? Which...

HI there, I have a 2024 Keystone Montana High Country 295rl, I can not find the pin box number. It appears to be the Lippert Trail-air Road Armor which may now be Curt Roto-Flex with the 1116 bolt pattern, two rows of three bolts on each side...

Hello, I am going to change the bearings on my boat trailer. What do I need to do or to provide to insure that I purchase the correct parts? Thank you. | Replacing your boat trailer's wheel bearings and seals is easiest if you pull one of the...

Hi, i need a weight distribution hitch made for boat trailers. My boat weights around 5,300lbs and it has surge brakes. My trailer only has one beam that extends to the truck, meaning it does not Y like most camper trailer frames. The Y is...

Jameson, What clearance issue arises for this with the CRE3000 kit? I am only interested in lifting my trailer and not shifting the alignment. | Hey Brian, I believe you are asking about the Correct Track lift kit part # RR23QX and why it can't...

Hello, I have lippert 8K axles in tandem and need to raise the height of the trailer. On certain roads/driveways with a buckle on the ascent/decent, I am dragging the rear end of our 30foot trailer when having to back down an inclined dirt driveway....

I have a ford f450 4x4 with 8ft bed, I am having a slight issue with vertical bed rails clearance I currently have the following set up- MORryde Cushioned 5th Wheel Pin Box for Trailers Over 18K w/ Lippert 1621SHD Trailair Coupled to the...

I have a 2025 keystone Coleman 17b. I’d like to lift it a couple inches as it scrapes going into and out of my driveway. What Kit would you recommend? | Hi Justin; do the leaf springs run under your axle (underslung) or are they sitting on top...

has Lippert discontinued the Correct Track kits? | Yes, they have Dan. The alternative to the Lippert Correct Track is the Correct Track Trailer Alignment and Lift Kit item # RR23QX and item # RR55QX. These kits include brackets that attach...

I need some help with choosing a weight distribution hitch. Rick. | Hi Rick; I can definitely help you choose a weight distribution hitch for your setup. To find the right WDH you need to know the tongue weight of your loaded setup....