Is Correct Track Trailer Alignment and Lift Kit Compatible With MORryde Suspension Upgrade Kit
Updated 03/28/2024 | Published 03/09/2024
Products Featured in This Question
Question:
Are the moryde style wet bolts long enough to use with the correct track lift kit?
asked by: Kevin
Expert Reply:
If you install the Correct Track Trailer Alignment and Lift Kit # RR23QX it will require longer bolts but MORryde makes a kit specifically for this. To find the right MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track you will need the center to center bolt hole measurement from your current shackle straps.
If you have 2-1/4" shackles you need the MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track # MR58ZR. If you have 3-1/8" you need the # MR98ZR instead. You will also need two additional # MR52HR. The kit was originally made for a different version of the Correct Track and MORryde hasn't updated it yet. The two 2-7/8" long bolts need to be replaced with these 3-3/8" long bolts. If you already have the regular kit you can just swap out your 2-7/8" bolts for the # MR52HR.
Product Page this Question was Asked From
Correct Track Trailer Alignment and Lift Kit - Tandem Axle
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- RV Ride Control
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: morryde trailer suspension parts
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" Shackle Straps
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 3-1/8" Shackle Straps
- Search Results: moryde cre 3000
- Search Results: bottle jack
- Search Results: moryde
- Search Results: equalizers
- Shop: Correct Track Trailer Alignment and Lift Kit - Tandem Axle
- Search Results: shackle
- Search Results: shackle kit
- Shop: MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Video: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track Feature Review
- Shop: MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Q&A: What is Difference Between MORryde Heavy Duty Shackle Bolt Kits MR98ZR and MR76ZR
- Q&A: Can MORryde X-Factor Crossmember Adapter Kit Be Used to Get Around Spare Tire and Black Tank
- Q&A: Best Shock Absorbing Suspension Equalizers
- Q&A: Is Tamarack ST225/75R15 LR E A Good Trailer Tire
- Video: Review of Power Mountain Automotive Tools - Jacks and Jack Stands - PM34FR
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Video: Review of the Replacement Foot Plate for Lippert Power Gear Hydraulic Jack
- Video: Ultimate Overview of the Replacement Footpad Kit for Lippert Hydraulic RV Landing Gear
- Article: How to Raise Your Travel Trailer Height
- Video: Review of Lippert Camper Jacks - Replacement Controller - LC28BX
- Q&A: Can I Use the 2-1/4 MORryde Suspension Kit # MR58ZR without Critically Changing Trailer Setup?
- Video: MORryde Tandem Axle Trailer Suspension Upgrade Kit Installation - 2018 Shasta Phoenix Fifth Wheel
- Q&A: Can the Reese Pull Pin Locking Plates Be Used On An M5 Hitch Head?
- Video: Review of Lippert Components Camper Jack - LC74FR
- Shop: RV Electrical
on Trailer Suspension Parts
Kevin
3/20/2024
How safe is the correct track trailer alignment and lift kit #RR23QX? It seems like it would put excessive stress on the welds on the spring mounting brackets/hangers, especially under periods of hard braking or under side loads during sharp turns at driving speed.