Result: knobs

If you're ok with losing your 12 volt outlet by your shifter you can use the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob item # 331-TPSI-003 to install the knob. | I have been a long...

Including the Ford Style dash for the control knob. Thanks in advance. | I am interested on installing this controller on my 2020 Ford Ranger with factory tow package 7 pin. If I order this item, are there other parts I need...

If you check out the attached video of this controller being installed on a 2014 Jeep Grand Cherokee you can see that the control knob is actually mounted in the center console. Since the control knob doesn't have to be mounted in a specific orientation it really opens up the possibilities for installation. |

From there you can use the knob to fine tune it. Below are some pictures of how people have mounted the knob and a link to an install video for a 2021 Range. | 2025 ford ranger no tow package. XL trim, spray...

I have been looking at Redarc and Curt Spectrum Trailer Brake Controller - Dash Mounted Knob - Up to 4 Axles - Proportional - thank you | what brake controllers best fit a 2021 Ford Ranger Lariat with a factory tow package?...

You will then be able to turn the controller knob fully counter-clockwise, press the brake pedal, double click the brake knob twice within 1 second and then release the brake pedal this will change the light from blue to green. |

The main unit can be mounted in any position, and the control knob mounts in the dash of your vehicle. The knob uses a colored LED for diagnostics and works as a manual override when pressed. | I was looking...

This brake controller allows you to mount the main unit out of sight with the knob mounted in the dash. The knob allows for quick and easy adjustment and also functions as a manual override. | Can I use the...

In the video you can see David easily completes the installation with the most difficult part being when he pops the 12v outlet out to replace it with the knob for the controller so that he doesn't have to drill a new hole in the dash to install the knob. |

I see that the Redarc has a separate adjustment knob that you mount wherever desired. The knob then plugs into the control box and the Ranger factory wiring gets spliced into a 4-wire pigtail that then plugs into the controller to complete the installation. |

Didn’t know which Custom harness dash knob I would need. Thank you. | I have a 2024 Ford Ranger XLT with tow package. What do I need to order for this to be a plug n play install, also I would like the button to be mounted...

Adjust the feet to fit your mirror housing and then twist the tightening knob. Please note the attached product review and installation videos. | Do these sideview mirrors extensions fit well on the 2021 Ford Ranger? | The...

The knob adjusts the braking power and also acts as the manual override. | I need everything to tow a trailer with brakes with my 2021 Ford Ranger, hitch, wiring, ball, brake controller. What should I get for this? Can you...

I like the Redarc style with only the knob exposed | I have a 2022 Ford Ranger what trailer brake controller do I need. I like the Redarc style with only the knob exposed | The Redarc Tow-Pro Elite Brake Controller part # RED44FR...

It’s a really clean option because it uses a small dash mounted knob instead of a bulky controller, and it comes with a custom harness designed for Ford trucks like yours. | I have a 2025 ford ranger with factory tow hitch...

For a brake controller the Redarc Tow Pro Liberty part # RED52VR would be a really great choice that works well and only puts a small knob on your dash. What RV do you have? | 2019 Ford Ranger with tow package. Do I require...

When we did this install on the 2019 Ranger we used the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-003 to mount the # RED44FR which replaced one of the factory 12v outlets, but you can mount the knob in another location if desired. |

The small footprint of the control knob is ideal as there is not a lot of open space on your dash. | I have a fully loaded ford ranger tremor with the tow package i need a brake controller got a quote for the ford one for 1200...

The only part visible is the control knob. This means no bulky brake controller hanging down by your knee in your brand new truck. | Can a Redarc Tow-Pro Elite # RED44FR be installed in a 2022 Ford Ranger w/ Factory 7-way...

The installation is easier compared to the other options because of it's integrated tightening knob. The feet of the Inno rack are compatible with the fixed mounting points on the roof of the Ford. | 2004 Ford Excursion Limited....

Pro Tip: Spay some lubricant like WD-40 or PB Blaster on the rubber isolators to make it easier to remove the hanger knobs. | I purchased the replacement CURT trailer hitch hardware from eTrailer for this hitch and installed...

The rack can be a little cumbersome to break down as there are a couple steps needed and those steps are made more difficult with bikes loaded because you have to use the handle and knob on the crossbar to get the rack to start collapsing again to remove it from the draw bar. |

Since you already have the 4 flat on the back, in order for you to use the Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional # RED52VR you will need to install the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires # ETBC7. |

You would be running 10ga wire # 10-1-1 from the brake controller to the 7-way and battery. The control knob will need to be mounted into the dash so you will need to remove some of the dash panels to get it installed. | How...