Installing The Redarc Tow-Pro Elite Brake Controller On A 2024 Ford Ranger XLT
Updated 05/27/2026 | Published 05/19/2026
Products Featured in This Question
Question:
I have a 2024 Ford Ranger XLT with tow package. What do I need to order for this to be a plug n play install, also I would like the button to be mounted next to the other switches as I do have a blank spot for one. Didn’t know which Custom harness dash knob I would need. Thank you.
asked by: Richard
Expert Reply:
Hi Richard!
The Redarc Tow-Pro Elite can definitely be installed on your 2024 Ford Ranger XLT with tow package. One thing to note though, your truck may not have a brake controller port/plug even with it having the factory towing package (Ford does weird stuff sometimes).
There should be four wires coming out of a large wire harness by the driver side firewall, left of the brake pedal. If you have those wires instead of the port, you will want the # RED44FR. This is the exact same controller, just without the pigtail harness that plugs into the port. If you have the port, the # RED55CR is the correct one for you. So definitely check before ordering.
As to mounting the knob, you can either drill a hole into that blank you have, or use the Universal Mounting Panel # 331-TPSI-001 (I included an image with its dimensions). Redarc doesn't currently make a custom fit mounting panel for your truck. If I were doing this, I would honestly just drill out the blank you already have in your truck.
What kind of trailer are you going to be towing?
(click to enlarge)
Product Page this Question was Asked From
Redarc Tow-Pro Elite Brake Controller w/ Custom Harness - Dash Knob - Off-Road Mode - Up to 3 Axles
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Plug-In
- Dash-Mounted Knob
- Behind-Dash
- Up to 3 Axles
- Indicator Lights
- Single Trailer Only
- Redarc
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Dexter Electric Over Hydraulic Actuator Not Working with Ford Factory Brake Controller
- Q&A: Can I Mount the Redarc Tow-Pro Link to a Trailer Instead of Under the Vehicle?
- Q&A: Recommended Off-Road Brake Controller for a 2024 Ford F-150
- Q&A: Differences Between the Redarc Tow Pro Trail and Elite
- Q&A: Recommended Rock Tamers Mud Flap System for a 2020 Ford F-350 Dually
- Q&A: Parts Needed to Install Redarc Tow Pro Elite in 2007 Toyota Tundra
- Q&A: Shock Absorbing and Adjustable Ball Mount for a Cruisemaster DO35 Coupler
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: RV AC Not Cooling? What's Normal, What to Check, and When to Replace
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: The 5 Best Trailer Drop Hitches You Can Buy
Randall W.
5/27/2026
Hey Richard, I have a 2023 Bronco Wildtrack and installed the RedArc Pro neatly under the dash using the factory harness plug. There was a handy sheet metal brace under the steering wheel where I mounted the control box and drilled out the blank switch next to the headlight controls. It’s a nice and clean install and I’d be happy to share a pic if I had the ability to upload to this post. Overall, straight forward install so long as the factory plug is under the dash. Good luck! -RW