2008 Nissan Frontier Radiator Fan

Hey David, the Derale transmission cooler part #D15200 that you referenced does not come with a thermostat or any install kit components but if you wanted a similar option that does have all of that you would want the part #D15500.

Each of the fans of the Flex-a-lite Dual 13-1/2" Electric Radiator Fans w/ Shroud #FLX295 can flow up to 2,300 CFM. Also worth mentioning is that the likelihood of one of the fans failing is very low.

The towing capacity of the 2003 Chevrolet Avalanche 1500 with 5.3L V8 and 4.10 rear axle is 8100-lbs. For a 7600-lb GVWR travel trailer the resulting 500-lb safety margin is adequate/low-ish. With a trailer that weighs substantially more than the tow…

In regards to the Derale Thermal Fan Clutch with Reverse Rotation part #D22140, the distance from the mounting surface to the end of the shaft is 1-13/16" and the distance from the mounting surface to the end of the clutch is 1-3/4". I went…

Thanks for your question, Shannon! I reached out to SnowBear to confirm which blade would be the replacement part. They let me know that part #K2SB8200 is the correct part you would need. It comes as 3 pieces totaling to the 82" that your plow…

Hey Steve. To replace the remote on your SnowBear Snowplow for 2" Hitches item #K2AVAL8219, you'll need the Replacement Wireless Remote Control for Detail K2 Snowplows item #K2WR100. The remote is programmed specific to the black solenoid…

Hi Tom; the Taylor Made Marine Gas Strut for Boat Hatches - 10 mm Socket - 10 lb Force - 10" Long - Steel #3691822-10 measures 7" on center when compressed.

Hello Clayton. With a firestone air bag kit, you really do not need to worry about over extending them. The top and bottom plates use a rolled crimp seal that is quite strong. They can handle being extended so you do not have to worry about damaging…

First you will need the Fan #FLX236 which will be controlled using the Flex-a-lite Adjustable Temperature Controller #FLX31149 on your 2005 GMC Envoy. You can also add the Auxiliary Switch #FLX31148 if you want to be able to turn on the fan manually.…

I have linked the installation instructions for Draw-Tite Class III hitch #75270 that fits your 2011 Honda Odyssey and the hardware torque specs, as well as a listing of the required tools, is included for your reference. Among other basic tools…

The choice of oil bath or regular hubs is up to the manufacturer. They are usually found on higher capacity axles, though as you know there are some on lower capacity axles. You can convert some hubs from grease to oil bath using a kit such as…