Looking For 15" Aluminum Liger Trailer Wheels

Question

Question:

Have a 2026 Xpress boat with 15inch linger wheels and 205/75/15 west lake tires. Two of the 4 wheels have clear coat peeling.

asked by: Dylan P

0

Expert Reply:

Hey Dylan, thanks for reaching out. We do carry that 15" aluminum Liger wheel in black. We have them in both a 5-lug and 6-lug. Take a look at the following:

- Aluminum Liger Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 - Glossy Black # LH49FR

- Aluminum Liger Trailer Wheel - 15" x 5" Rim - 5 on 4-1/2 - Glossy Black # LH34FR

- Aluminum Liger Trailer Wheel - 15" x 6" Rim- 5 on 4-1/2- Matte Black # LH64ZR

Were you needing new tires too? Or just the wheels?

expert reply by: Jesse M

0

Aluminum Liger Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 - Glossy Black
(click to enlarge)

Chris S.

5/9/2026

I had a tire blow out on my travel trailer while driving home on the Interstate, and the original wheel was badly damaged. The new one I purchased from e-trailer was a perfect match.

Jesse M.

5/11/2026

@ChrisS Ah dang sorry to hear that happened. Glad to hear the new wheel matched up and is working out though. Thanks for sharing!

Answer 1

On your trailer if you can bolt winch #1120210 directly to that front frame structure then that would be ideal. If you want it on the diamond plate you will want to use a steel backing plate that is also bolted to that front frame structure. That…

view full answer...

Answer 2

We sure do Matt! To add a center cap to the Aluminum AM03 Series Matte Black Machined Trailer Wheel item #AM53NR you can use the Americana Trailer Wheel Center Cap item #AM90175 for stainless or item #CXF106B for black. I recommend going with the…

view full answer...

Answer 3

Hey Richard, I can clear this up for you since it gets confusing when talking about tire and rim sizes. It really depends on the tire because there is no standard when it comes to specific tire sizes. For example, the Westlake ST225/75R15 Radial…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Looking For 15" Aluminum Liger Trailer Wheels

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching