What Size Metal Trailer Fenders for Tire Size 20.5 x 8 - 10

Question

Question:

What metal fenders do you recommend for 20.5x8x10 tires? Seems like most 10inch fenders would be too narrow.

asked by: Bruce B

1

Helpful Expert Reply:

The Jeep-style trailer fender you referenced, Redline Single Axle Steel Trailer Fender # J10821,
does fit 10-inch wheels and is a weld-on application. Your tire size, 20.5 x 8 - 10, has a modern metric size equivalent of 205/65-10 and this size fits a 6-inch-wide rim. Please refer to the linked article on tire sizes for additional information. This width tire/wheel will easily fit a 10-inch-wide fender.

I have also included a link to our main page for trailer fenders. Filters in the left-hand margin will allow you to narrow the results based on your preferred material, steel or aluminum, mounting type, etc.

expert reply by: Adam R

1

Answer 1

Hey Nick, thanks for the information! For 205/75d15 tires you'll need a fender designed for 15" wheels that's at least 27-1/2" wide if the fender is going to sit near the widest part of the diameter of your tires. The Single Axle…

view full answer...

Answer 2

A trailer tire of size 5.30 x 12 has an overall diameter of right around 22-inches when mounted and fully inflated so you can refer to the linked page for trailer fenders that displays all 12-inch-wheel-compatible fenders made of steel that will weld…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 9

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

What Size Metal Trailer Fenders for Tire Size 20.5 x 8 - 10

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching