Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
10" Wide x 22-3/4" long x 9-1/4" tall. This 16-gauge steel, Jeep-style fender is a weld-on application for 13"-15" wheels. The fender has a 1/2" radius lip on the front and back.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this single axle Jeep style trailer fender. Now this fender here is designed for single axle trailers. It is made of a 16 gauge raw steel construction. And when we say raw steel, you should be able to look at it, you can see, since it is raw steel, it can get rust to form on it very fast. But that's just surface rust, so it can be cleaned up easily with steel wool over it before you paint it.
This fender is designed to fit 13 inch to 15 inch tire wheel assemblies. Has a 1/2 inch radius, you can see, on both sides of the fender, and it is made in the USA, it is for a quantity of one fender. Last thing we're gonna do is give you some measurements on this. First, we'll measure the length from this end to this end. So if we get our tape measure up, then we go this end to this end, you'll be able to see is just under 23, about 22 3/4 inches.
The width on it, which is gonna be measured this way, so we put our tape measure on that, right at 10 inches for the width. And then the height of it, the height is gonna be measured from the very top to the very bottom. So with this, we'll put our tape measure on that and you can see is about 9 1/4 inches tall. But that should do it for a review on this single axle Jeep style trailer fender.
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
Ratings & Reviews
Mike
1/28/2015
These fenders are well built, better than the original fenders. Original fenders were 20 ga., these are 16 ga. work great.
David K.
2/21/2018
Great fender. Very sturdy construction. It took very little prep to produce a beautiful paint finish.
Do you have a question about this Trailer Fender?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Allen
2/13/2015
The fenders worked out very well and with your help was able to choose the correct ones needed. Will buy again.