Recommended PullRite SuperGlide Capture Plate for a Curt or Lippert Helux 5th Wheel Pin Box

Published 09/17/2026

Products Featured in This Question

PullRite SuperGlide Quick Connect Capture Plate for Lippert Helux Pin Boxes

(37)

$180.25

Curt Helux Shock-Absorbing 5th Wheel Pin Box - Lippert Rhino - 24K GTW - 4,000 lbs TW

(26)

$1595.95

Handrail for Second Generation 3-Step MORryde Steps

(306)

$71.52

PullRite SuperGlide 5th Wheel Hitch for Short Bed Trucks - 16K

(85)

$1515.00

Question:

Looking for a plastic lube plate for my 25 Brinkley Z2680 with a Helux hitch on the trailer. Do I need a 10 or 12 inch model?

asked by: Jeffery F

Expert Reply:

Welcome back Jeffery. Which size lube plate you need is going to depend on what 5th wheel hitch you have. The last time we spoke you were looking at the PullRite SuperGlide 5th Wheel Hitch item # PUL93RR. This requires the PullRite SuperGlide Quick Connect Capture Plate item # PUL68MR not a lube plate to work with a Curt or Lippert Helux pin box like item # C65MJ.

The PullRite SuperGlide Quick Connect Capture Plate item # PUL68MR is designed to bolt directly to the bottom of the Helux pin box item # C65MJ. Using an additional lube plate would put too much space between the pin box and the head of the PullRite SuperGlide item # PUL93RR. According to PullRite's instructions, the plate and it’s moving parts should be lubricated with a light lubricant such as WD-40 or 3-in-1 oil, before each trip or as needed.

Did you end up getting a different 5th wheel hitch than the SuperGlide? If so what make and model? If you can put that information below where it says Add Comment, I can look up what size lube plate it'll need.