bing tracking image
Q & A Icon

What Size Electric Jack is Best For Lifting a 2024 Gulf Stream RV Trail Boss 150RD?  

Updated 09/22/2026 | Published 09/14/2026

Products Featured in This Question



Question:

I am trying to figure out what Electric camper A frame jack I need for a 2024 Gulf Stream RV Trail Boss 150RD? I am thinking the e55ZV or e23ZV?

0

Expert Reply:

Hi Sean!

The etrailer Electric Trailer Jack - 3,500lbs part # e23ZV is more than sufficient for lifting your 2024 Gulf Stream RV Trail Boss 150RD. The # e23ZV is capable of lifting 3,500lbs of tongue weight and since your Gulf Stream GVWR should be around 3,950lbs that puts your tongue weight at roughly 395lbs to 592.5lbs, which is far below the capacity of this jack.

What's your favorite place to take your Gulf Stream camping?

expert reply by:
0
Claire H
Brian C. profile picture

Brian C.

9/18/2026

I agree with the expert. The 3500 lb jack will handle most travel trailers. We have a ram 1500 and the jack has lifted the back of the pickup quite a ways to set the weight distribution bars with no apparent effort.

Claire H. profile picture
Etrailer Expert

Claire H.

9/18/2026

@BrianC Glad to hear the jack has been working so well for you! Sounds like it handles the extra lift needed to hook up your weight distribution bars without breaking a sweat. Thanks for sharing your experience!
Bobbo301 profile picture

Bobbo301

9/18/2026

Apex Nano 213RDS, 25', 650# tongue. Electric Trailer Jack - A-Frame - 18" Lift - 3,500 lbs e23ZV This was a replacement for the one I bought from Harbor Freight which quit working after 2 years. I was at a camp site and had this shipped to a nearby friend's house. I swapped it out and installed it using a drill and some basic tools. You can swap it out by leaving the camper hitched on the truck ball and unbolting the existing one. Because my F150 tail gate hits the head when dropped, I turned the head one screw hole away, so the tail gate then misses it. Same thing with a Tahoe lift gate. The bolt holes aren't equidistant so one of the hitch's threaded holes needs to be wallowed out with a drill bit and that lift hole secured with a 1/4" bolt and nut. The other two threaded power head holes just secure with the 2 bolts you took out from the old one. You'll need some zip ties and black tape to tidy up the wires to the battery. Took 25 minutes and 1 beer. Happy camping.

Claire H. profile picture
Etrailer Expert

Claire H.

9/18/2026

@Bobbo301 Sounds like the jack worked out great, especially for an unexpected campsite replacement! Glad the swap was quick and easy with just some basic tools. Thanks for sharing the tip about the tailgate clearance too—that could definitely help someone with a similar setup.
Terry profile picture

Terry

9/22/2026

I agree with rep. Jack installed fairly easy and worker great. Have since sold trailer.

Claire H. profile picture
Etrailer Expert

Claire H.

9/22/2026

@Terry Glad to hear the jack was easy to install and worked great while you had the trailer. Thanks for sharing your experience!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>