Hitch for 2025 Ram ProMaster 2500 with

Updated 07/25/2026 | Published 07/19/2026

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(164)

$359.27

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(69)

$99.71

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3535)

$118.67

Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional

(3082)

$217.00

Question:

I have a Promaster 2025 2500 long wheel base, the interior is 12 feet bed, your hitches call for shorter beds? which should i buy?

asked by: gabriel c

Expert Reply:

Hey Gabriel!

It looks like you were looking at hitches for a 2025 Ram 2500 and not the Ram ProMaster 2500 with a 136" wheel base. The correct hitch for your ProMaster 2500 is the Curt Trailer Hitch Receiver # C13207, which is specified for the "Standard Length Cargo Van." I reached out to the manufacturer for clarification on that and confirmed it is a proper fit for the 136" wheelbase, which would be just shy of your 12' length. They sent the photo below to explain the difference, so as long as you don't have the extended body ProMaster 2500 (and based on your dimensions, you don't), this is the right one for you.

If you plan on towing a trailer, you can use the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C58DR to connect to the trailer lights. If you're towing a trailer with brakes, you can use our Universal Installation Kit for Trailer Brake Controller # ETBC7 and a brake controller like Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness # RED52VR.

How do you use your ProMaster? What are you towing with it?

expert reply by: Jerry B

dimensions that show the difference between different models of Ram ProMaster cargo vans
(click to enlarge)

Andy

7/25/2026

I have a 159” high top. It fits with a bit of modification. There’s a stud on the driver side frame rail that gets in the way. The hitch has a hole in it to accommodate the stud but either the stud or the shop was in the wrong location. Also when the hitch was shipped from etrailer, the 9/16x2.5 carriage bolt was missing. It was quite and ordeal to get a replacement sent. I hope this helps set your expectations.

Jerry B.

7/25/2026

@Andy Thanks for your feedback and follow up. I took a look at your account and saw the inventory issues we were having with this specific hitch. That's been resolved now and all of the hitches have been updated. Again, thanks for working with us on that, and let me know if there's anything else I can help you with!