What Timbrens and Spacers do I Need for My 2019 Ram 1500 with 6" Lift?
Updated 07/13/2026 | Published 07/04/2026 >
Products Featured in This Question
Question:
Hello, I am looking to add some of those suspension enhancements to my 2019 Ram 1500 Tradesman 4x4 crewcab with a 6 suspension lift on 35 tires. Is there a set that will work on my truck? I am hoping that bump stop things will help stop the squat... when towing my travel trailer. Thanks for your time and help Rob
asked by: Robert C
Expert Reply:
Hello Rob,
Welcome to etrailer! I'm happy you found us.
The Timbren Rear Suspension Enhancement System # TDR1500DQ can work with your 6 inch lift, but we'll need to figure out the correct spacer setup first. I attached an image showing where to measure. Just measure from the top of the axle to the frame where the Timbren will contact.
The Timbren spring is 5-1/2 inches tall, and Timbren recommends up to a 1 inch gap between the spring and the axle, although most people prefer around a 1/2 inch gap so the Timbren engages a little sooner when towing.
The Spacer Kit for Timbren Suspension Enhancement System # T68MR includes two 1 inch spacers and two 1/2 inch spacers, giving you up to 1-1/2 inches of spacer height per side. If it turns out you need more than that, you can add the Timbren 1 Inch Spacer for Raised Frame Vehicles # A25723-90AH00. Since you'll be stacking spacers, you'll also need to pick up longer mounting bolts from your local hardware store.
Once you get that axle-to-frame measurement, send it over and I'll let you know exactly which spacers you'll need.
What are you hauling that you need the additional support?

Steve G.
7/10/2026
Yeah, I have a 2020 Ram 1500 Laramie with hemi off road package towing a Cougar 1/2 ton travel trailer. The Timbrens make a world of difference for stability while towing with the truck handling so much better than stock taking the squat out of the rear. The truck is almost level when loaded up, of course I put minimal water in the fresh water tank and try to keep it light. Went to Utah and Grand Canyon last year from California, it handled well for a half ton! You can't beat Timbrens for the money and what they accomplish!

Product Page this Question was Asked From
Timbren Rear Suspension Enhancement System
- Vehicle Suspension
- Towing/Load Leveling
- Bump Stops
- Suspension Only
- Extra Heavy Duty
- Rear Axle Suspension Enhancement
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Which Timbren Kit Fits 2023 Ram 1500 4x4
- Q&A: What is the Difference Between the Power Watchdog # HU67FR and # HU42VR?
- Q&A: Recommended Suspension Enhancement System for a 2017 Ram 1500
- Q&A: Difference Between Timbren # TDR1500DS and # TDR1500DQ for 2011 Ram 1500
- Q&A: Timbren Suspension Enhancement Fit For 2022 Ram 1500
- Q&A: Best Way To Prevent Sag While Towing with a 2019 Ram 1500
- Article: Best Air Bag Suspension 2025
- Q&A: Timbrens Vs SumoSprings for a 2017 Ram 1500
- Article: Practice Safe Trailer Towing with These 4 Tips
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How Much Truck Sag Is Too Much? | Suspension Fix Guide
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?






Carlos
7/10/2026
Happy Friday, I have the Timbren installed on a 2022 Ram 1500 with the stock Off-Road Package. The SES is just over an inch from engaging. I usually tow a boat with the truck bed loaded, and have not had a single suspension problem with the truck "squatting" even when loaded. In my setup I hardly ever worry about the SES having to engage. Additionally, there is enough gap that the SES does not affect daily driving at all.