Trailer Hitch for 2003 Toyota Tundra With Tow Package

Question

Question:

What is the part number rear hitch would I need for a 2003 Toyota Tundra Limited 4wd that was built with the trailer towing package option? Thanks

asked by: Mike B

0

Expert Reply:

Hey Mike! When you say you have the tow package option I'm assuming you have the factory hitch. None of the hitches will fit your Tundra as is since the factory hitch is tied into the rear bumper and bumper brackets. You will have to replace the bumper from another Tundra without the factory hitch to be able to install one like the Curt # 13184.

What do you typically tow with your truck?

expert reply by: Robin H

0

Curt Hitch
(click to enlarge)

Answer 1

All of the trailer hitches we have for your 2003 Toyota Tundra mount directly to the frame and don't use the brackets that the factory hitch and bumper use. So for your application I recommend replacing your OEM bumper with the Sport bumper since…

view full answer...

Answer 2

The Curt hitch part #13184 is the correct hitch for your 2002 Toyota Tundra that has the towable bumper. This hitch has a towing capacity of 5,000 lb. I attached an install video for it for you to check out as well.

view full answer...

Answer 3

Yes, the Hidden Hitch part #13184 will fit your 2001 Toyota Tundra regular cab as it has been confirmed as a fit for all models of the 2001 Tundra. I attached an install video for you to check out as well. If you wanted to do some towing you might be…

view full answer...

Answer 4

The answer to your question will depend on if you have the actual 'factory' hitch which is incorporated into the bumper brackets or the 'dealer installed' hitch which is just bolted to the frame. If you have the dealer installed…

view full answer...

Answer 5

Thanks for reaching out, those factory bumpers are a unique situation but I have a solution or two for you: **Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #13184. *Westin Fey Surestep Rear Bumper - Black Powder Coated Steel #61001.…

view full answer...

Answer 6

The safety chain holes are well hidden on Curt trailer hitch #C13180. There is a part of the hitch above the receiver that attaches to the vehicle bumper. The holes are in that plate. I have included a picture pointing them out.

view full answer...

Answer 7

The factory towable bumper on a 2002 Toyota Tundra is one that has about a 1" diameter hole drilled in the center of the bumper for a hitch ball. I have attached a photo of a Tundra with and without a factory towable bumper for you to help…

view full answer...

Answer 8

Yes, you can install Curt trailer hitch #13184 on your 2003 Toyota Tundra with the factory towable bumper. I have included a link to a video showing an example installation for you. I also recommend etrailer ball mount kit #989900. It comes with 2…

view full answer...

Answer 9

The good news is that the Curt hitch part #13184 fits both style of bumpers. This hitch has great towing capacities at 5,000 lbs total trailer weight and will work well for you.

view full answer...

Answer 10

Hey Oliver, so the Curt hitch part #13184 is listed as a fit for your 2000 Toyota Tundra but what most likely happened is that it got bent in shipping just looking at the mounting flange design and how often this happens. You can try again with a new…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Trailer Hitch for 2003 Toyota Tundra With Tow Package

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching