Does the EcoHitch Hitch # EH93SR Fit the 2026 Kia EV6 GT-Line?

Question

Question:

It says it does not fit the GT model but will it fit the GT-line model?

asked by: Jeremy H

0

Expert Reply:

Hello Jeremy,

Thanks for writing in.

Yes, the EcoHitch Stealth Trailer Hitch Receiver #EH93SR is confirmed to fit Kia EV6 GT-Line models. The fit exclusion applies specifically to the EV6 GT trim, which has different rear-end components than the other EV6 trims, including the GT-line.

If you have a GT-Line, this hitch is a good option because it is designed to mount behind the rear bumper and provides a removable 2-inch receiver for towing or carrying hitch-mounted accessories while maintaining a clean appearance when the receiver is removed.

If you needed some wiring for a hitch mounted accessory, the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236 is your best option at this time as there is not a plug-n-play option.

What are you planning on using the bike rack for?

expert reply by: Kate F

0

Answer 1

Hello Kristian, We have only completed an installation of the Draw-Tite #DT85GR on a 2022 Kia EV6. Since the frame design has remained the same through the 2024 model, the measurement from the ground to the inside top of the receiver is approximately…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

Hey George, for your 2026 Toyota RAV4 Hybrid we have the Curt hitch part #C34FR62ZY as a confirmed fit but it's on a little bit of a backorder at the moment which is why you don't see any hitch options in our fitguide. The hitches from…

view full answer...

Does the EcoHitch Hitch # EH93SR Fit the 2026 Kia EV6 GT-Line?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching