bing tracking image
Q & A Icon

Options For Adding Lights To The Erickson Aluminum Cargo Carrier EM34JV  

Updated 05/07/2026 | Published 05/05/2026

Question:

I wanted to see if I can place a Tow Bar Light at the tip of the carrier. Any Tow Bar Light you recommend that would work with the 1.25inch square opening? I think the opening is a 1.25inch but please confirm that as well.

0

Expert Reply:

Hi Omair!

I do have a good option for you, bit I am not aware of anything that will fit into the end of the Erickson Aluminum Mobility / Cargo Carrier - 30-1/4" Wide x 50" Long - 400 lbs # EM34JV.

So with that being said, I think you are looking for something like the Curt Auxiliary LED Indicator Lights # C53201. These have a very strong adhesive on the back of the lights and can be stuck onto just about anything. There is plenty of wiring to get them plugged into your vehicle as well. I tend to recommend these to people looking to add lights to platform bike racks and I think it would be a really good option for this carrier as well.

What are you going to be using the carrier to carry?

expert reply by:
0
Lazer S
Curt Auxiliary LED Indicator Lights C53201 On Another Carrier
Curt Auxiliary LED Indicator Lights C53201 On Another Carrier
(click to enlarge)
Omair profile picture

Omair

5/7/2026

Well, I removed the folding function from this carrier and will only be using it to carry a Snowblower (230 lbs). Wanted to fish the wire through the carrier itself and plug into the 4-Pin connector. That is a great product and will probably fit the bill. Will email you a picture when I am installed.

Lazer S. profile picture
Etrailer Expert

Lazer S.

5/7/2026

@Omair Gotcha. I think you could run the wires for the # C53201 through the center support of the carrier. Might be a little difficult to do, but I think it can be done. But anyway, let me know if there is anything else I can help with! ^___^

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>