What Size Hitch Pin Fits The Curt Hitch Receiver Reducer Sleeve part # C45408?
Updated 04/30/2026 | Published 04/25/2026
Products Featured in This Question
Question:
Curt Hitch Receiver Reducer Sleeves - 3inch to 2-1/2inch or 2 Will a 3/4” pin fit this sleeve or does it require the 5/8” pin?
asked by: Steve B
Expert Reply:
Hi Steve,
The Curt Hitch Receiver Reducer Sleeves - 3inch to 2-1/2inch or 2-inch part # C45408 has a pin hole diameter of 3/4". However, since this is adapting all the way down to a 2 inch, you'll need to use a 5/8" pin because the pin hole diameter of a ball mount you want to tow with will be 5/8" in diameter for an accessory that fits a 2 1/2" or 2" hitch. You'll have a small amount of room around the pin hole for the 3 in sleeve, but it will be flush to the pin hole for the 2 1/2" or 2" pin hole of the ball mount. If you're needing a locking hitch pin, I recommend the InfiniteRule Hitch Lock for 3 inch Hitches part # 34061073-D. It's a stainless steel hitch pin lock with a 3 5/8" span, 5/8" pin diameter, and comes with two keys and sits flush agains the side of the hitch tube to reduce slop.
If you need to use an adapter with an extension in the future, please keep in mind that the general rule of thumb is that it will decrease your tongue weight by around 50% due to added leverage.
What do you usually tow with your truck's 3" receiver?
Product Page this Question was Asked From
Curt Hitch Receiver Reducer Sleeves - 3" to 2-1/2" or 2"
- Hitch Adapters
- Hitch Reducer
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- No Extension
- Fits 3 Inch Hitch
- 3 Inch to 2 Inch
- 3 Inch to 2-1/2 Inch
- CURT
more information >
Continue Researching
- Q&A: Is There a Difference in Shank Diameter Between the WeighSafe Safe Load and B&W Gooseneck Hitch?
- Shop: Base Plate for Tow Bar
- Shop: Gooseneck Hitch
- Search Results: hitch reducer
- Shop: Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Shop: InfiniteRule Hitch Lock for 3" Hitches - 3-5/8" Span - Stainless Steel
- Search Results: hitch adapter
- Shop: Curt Hitch Receiver Reducer Sleeves - 3" to 2-1/2" or 2"
- Shop: B&W Ball and Safety Chain Kit for Ford, GM, Chevy, and Nissan Titan XD Underbed Gooseneck Hitch
- Shop: Mud Flaps
- Shop: Blue Ox Base Plate Kit - Removable Arms
- Shop: InfiniteRule Hitch Lock for 3" Hitches - 3-7/8" Span - Stainless Steel
- Shop: InfiniteRule Ball Mount Hitch Lock - Gen-Y Mega Duty 32K and Fastway Flash HD - 3/4" Pin
- Video: 2014 Ford Focus Roadmaster Crossbar-Style Base Plate Kit: Complete Installation
- Q&A: Difference in Height Between Weight Safe Safe Load and B&W Gooseneck Hitch Balls
- Video: Review of Weigh Safe OEM Gooseneck Ball - WS74ZR
- Video: B and W Gooseneck Hitch Safety Chain Kit Installation - 2022 Ford F-450 Super Duty
- Video: Trailer Hitch Receiver Reducer Sleeves Spec Review
- Shop: BOLT brand vehicle and hitch locks
- Video: Review of Attwood Boat Bumpers - Double Braided Fender Lines - AT42ZR
- Video: Hands-On with the Roadmaster Base Plate Adapter Brackets for Blue Ox RV-Mounted Tow Bars
- Video: Installation Guide for the Roadmaster Direct-Connect Base Plate Kit on a 2014 Ford Focus
- Q&A: Ball Mount Recommendation for 3" Hitch Receiver on Ford F-450
- Search Results: demco parts
- Search Results: air force one parts
- Search Results: vehicle tow bar brake system
- Search Results: accessories and parts
- Search Results: brass fittings
- Q&A: Anti-Rattle and Locking Pin Recommendation for Class IV and Class V Hitches
- Q&A: Recommended 3 Inch to 2 Inch Hitch Reducer with 5/8 Inch Pin Hole
on Hitch Adapters
Steve B.
4/29/2026
Thank you Claire. I’ll order the 5/8” locking pin you recommended as it should cover the loads. Thanks again!