Result: hitch adapter

The Roadmaster Tow Defender Protective Screening #RM-4750 can physically be connected under the tow bar versus on top, but the reason why the manufacturer recommends and designed it to go on top is to give adequate ground clearance and to use the tow…

The Replacement 2 inch Hitch Adapter, part #853-7489, you asked about is an adapter, that Thule says will fit TH9028, TH9029, TH9030, TH9031 and TH934XTR bike carriers. They have the threaded hole in the shank that aligns with the hole on the…

I would be happy to recommend a 2" to 1-1/4" extended hitch adapter for you. Since your 2015 Jeep Wrangler's spare tire gets in the way of bike racks I recommend the etrailer Hitch Adapter #e38YR which will allow the 1-1/4" Yakima…

That's an 8k rated Dexter brake assembly for the right hand side of the trailer which we offer with the part #DX52QR for just the one assembly or part #23-428-429 for both the right and left side.

The Curt #C22UR and Draw-Tite #DT55MR are fairly similar in design, with the major difference between the two being their weight capacities. The Curt has a 3,500lb GTW and 350lb TW capacity while the Draw-Tite has a 4,500 GTW and 675lb TW capacity.…

As far as the Curt hitch #C22UR and the Draw-Tite #DT55MR, we unfortunately haven't had a chance to install the hitches yet. With that being said, we do not have the precise ground measurements when fitted onto a 2021 Toyota Sienna. However, both…

I do have an option for you but you cannot use multiple hitch adapters together like the dual hitch adapter part #D-192 and the hitch extender part #C45791 for example. This would create too weak of a connection point and would limit your towing…

I'm not quite sure what you mean by the "heart", however for your Ventline VD0434 we have the replacement screen frame #BVA0444-32, the replacement lid #BVD0449-A01, and the replacement ceiling garnish #VA0445-28 all available for…

For your 2018 Forest River Wolf Pup 18to travel trailer, I recommend the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black #BWTS10037B. This ball mount will give you the adjustability to tow your…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

This is a great question that there isn't exactly a great answer for. Hitch extenders not only put the weight further away from the hitch which would increase the leverage on the hitch, but they also add movement to the assembly which will…

I have attached a photo for you which shows a vehicle WITH the raised edges on the end panel and a vehicle WITHOUT the raised edges on the end panel. This end panel is attached to the vehicle's body, not the rear bumper fascia. If you take a look…