bing tracking image
Q & A Icon

Looking For Replacement Drive Head Pin And End Cap For Solera 2000 Regal Style Power Awning  

Updated 04/27/2026 | Published 04/19/2026

Question:

wind snapped the set screw on the drive side of my Solera 2000 power awning regal style. I will need to replace the drive head pin and set screws and the roller tube end cap and three retaining screws. Can you verify required P/N and availability and size of the set screw and retaining screws please. thank you

0

Expert Reply:

Hey Tom, thanks for reaching out. We can provide those parts for your Solera Regal style awning. We don't carry the set screws here, but we do have everything else. Here are the exact part numbers:

- Replacement Drive Head Pin for Solera Power RV Awnings - Regal Style - Qty 1 # LC93FR

- Replacement Roller Tube Endcap for Solera Power RV Awnings - Black - Qty 1 # LC423751

We don't have the screws here but I can tell you they are #6 screws 1/8" diameter x 1/2" long. You should be able to find them locally. Hope this helps.

expert reply by:
0
Jesse M
Tom C. profile picture

Tom C.

4/23/2026

Great customer service, questions answered with easy to understand information, making ordering repair parts easy.

Jesse M. profile picture
Etrailer Expert

Jesse M.

4/23/2026

@TomC Thanks, Tom! I appreciate that. You know where to find me if you ever need anything else!
David E. profile picture

David E.

4/24/2026

Don't install it alone or use clamps to assist. I got mine a little off, so it wobbles, because I was holding and drilling at same time. My screws had stripped the holes and had to re-drill the screws. So if you have that stripped holes you will want self tapping screws.

Jesse M. profile picture
Etrailer Expert

Jesse M.

4/24/2026

@DavidE Ah that makes sense. Thanks for the tips!
Dennis B. profile picture

Dennis B.

4/24/2026

@DavidE I also had to use self tapping screws due to damage to long roller bar. I did it by myself but two people would be better. You are fighting the spring tension in the struts and it’s trying to pull away end to end.
Jesse M. profile picture
Etrailer Expert

Jesse M.

4/27/2026

@DennisB Gotcha yes I can see how that would be easier with two people. Thanks for sharing!
Jim B. profile picture

Jim B.

4/24/2026

The roller tube I bought and installed worked great. I watch a couple of videos on the installation and the wife and Zi did it with no problems. Unfortunately, about 2 months later the electric brake/motor fied and ghe awning deployed st about 65mph. Nuff said about that. Customer was second to none.

Jesse M. profile picture
Etrailer Expert

Jesse M.

4/27/2026

@JimB Oof sorry to hear that happened. Awnings deploying on the highway is never good. Glad to hear we were able to get you taken care of though. Thanks for sharing!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>