What Are The Dimensions Of The Exterior Base Of 329-HM318BKS Snap-Lid Trailer Battery Box

Question

Question:

What are the exterior dimensions at the base? Not the lid.

asked by: Clint

0

Travel Trailer Battery Tray
(click to enlarge)

Expert Reply:

Hey Clint, I went out to the warehouse to measure the Snap-Top Battery Box with Strap for Group 24 to Group 31 Batteries # 329-HM318BKS for you. The overall length under the base is just about 15-1/2" at the longest part, then about 14-1/2" at the shorter part in the middle.

The overall width underneath is about 7-1/4".

I've attached some photos to show you if that makes it easier to follow :). What kind of trailer is this going on? It looks like a newer travel trailer of some sort.

expert reply by: Andrew N

0

329-HM318BKS dimensions
(click to enlarge)

Answer 1

I have a solution to help you install your Lippert Manual Double Step #LC432682. While your gusset plate idea would work, if you are concerned with stability I recommend using the Lippert Outriggers #LC301704 to help you mount the steps to your…

view full answer...

Answer 2

The only brackets we currently offer for RV steps are the Lippert Outriggers for Manual RV Steps #LC301704, which would mount directly to the frame of the trailer. Supports are definitely needed to hold the steps securely to the trailer frame and…

view full answer...

Answer 3

For your 2019 Lance 1985 travel trailer, I recommend taking a look at the: -Lippert Manual Pull-Out Step for RVs - Double - 7" Drop #LC432682. These are two step, manual pull out steps, that measures 25-1/2" between mounting brackets, and…

view full answer...

Answer 4

Hey Tom, for situations like yours where the mounting brackets/hardware don't match up perfectly the best solution is to use a set of outriggers like the part #LC301704 to install the steps #LC432682. This gives you the ability to attach brackets…

view full answer...

Answer 5

Hi James, We installed the Curt Trailer Hitch Receiver part #C94WR on a 2026 Hyundai Tucson and in the video, they take some measurements of the hitch on the vehicle. It looks like from the ground to the top of the inside of the hitch measures about…

view full answer...

Answer 6

Hey Gabe! For a hitch I recommend Curt #C94WR. This hitch fits all models of the 2026 Tucson, including your Limited Hybrid. The receiver sits right up under the bumper with the cross tube completely hidden. See the attached photo. What will you be…

view full answer...

Answer 7

Happy to help James, There are several ways to mount the TorkLift PowerArmor Locking Battery Box #TLA7700L depending on your trailer. The box does not use a specific bolt pattern in the bottom. Instead, it is designed to be mounted a few different…

view full answer...

Answer 8

Hey Ed! I reached out to NOCO and they said the Commercial Grade Battery Box for Group 4D Batteries #329-HM408 will be able to fit inside. There is enough flex, it will just be incredibly tight. This also means you won't have to try to fit the…

view full answer...

Answer 9

Welcome back Phillip, and thanks for the information! I've got two ball mounts that are close to 12" from the hitch pin hole to the center of the hitch ball but I don't have one that is exactly 12". I have listed them below:…

view full answer...

Answer 10

Hi Tim, If you're wanting to upgrade after adding a 200Ah battery, the WFCO Auto Detect RV Converter AC/DC Distribution Panel - 40 Amp part #WF46FR would be a great upgrade from your current 35 Amp converter. I wouldn't recommend upgrading to…

view full answer...

Answer 11

Hey Eddie! Yes, Group 31 batteries can fit in the TorkLift PowerArmor Locking Battery Box #TLA7700L. Your typical Group 31 battery measures 13" long x 6.8" wide x 9.4" high. The internal dimensions of the battery box are 31" long…

view full answer...

What Are The Dimensions Of The Exterior Base Of 329-HM318BKS Snap-Lid Trailer Battery Box

Product Page this Question was Asked From

Continue Researching