Will WattCycle 12V 314Ah Battery Fit Commercial Grade Battery Box for Group 4D Batteries
Updated 01/29/2026 | Published 01/24/2026
Question:
The next size up battery box HM484 is likely too deep for my travel trailer tongue Two questions: 1st: Thinking of buying a lithium battery WattCycle 12V 314Ah Ultra Bluetooth LiFePO4 Battery with 300A BMS with size at 20.63 × 9.65 × 8.66 inches. The 9.65 is 1/40 of an inch wider than the boxs 9 5/8 interior dimension. Do you think the box would flex enough to fit this battery? 2nd: What is the width of each cable opening in the box? Need to make sure I can fit the equivalent of wires, maybe parallel a few wires, to handle 300A that this battery is capable of continuous discharge.
asked by: Ed L
Expert Reply:
Hey Ed! I reached out to NOCO and they said the Commercial Grade Battery Box for Group 4D Batteries # 329-HM408 will be able to fit inside. There is enough flex, it will just be incredibly tight. This also means you won't have to try to fit the larger box on your tongue. The cable cutouts on the base are 1" and on the lid they're 0.625" wide.
Are you adding anything else with the battery?
(click to enlarge)
Product Page this Question was Asked From
Commercial Grade Battery Box for Group 4D Batteries - Vented
- Battery Boxes
- Camper Battery Box
- Equipment Battery Box
- Marine Battery Box
- Trailer Battery Box
- Group 4D
- 1 Battery
- Plastic
- NOCO
more information >
Continue Researching
- Search Results: battery
- Search Results: large lithium rv battery boxes
- Search Results: group 4d battery boxes
- Search Results: tounge box
- Search Results: battery cable battery connectors
- Search Results: fireplace
- Search Results: fuse
- Shop: Commercial Grade Battery Box for Group 4D Batteries - Vented
- Q&A: Can Commercial Grade Battery Box for Group 4D Batteries # 329-HM408 be Used with LiFePo Battery
- Shop: Replacement Converter Section for Progressive Dynamics Inteli-Power 4000 Series 45 Amp Power Center
- Q&A: Lithium Compatible Replacement Converter for a Progressive Dynamics 45w PD4045KA
- Q&A: Can Torklift Battery Box Attach to L-Brackets on Trailer Frame
- Q&A: Recommended Lithium Battery for a 3,000 watt Inverter
- Shop: Lippert In-Wall RV Slide-Out Motor
- Shop: Lippert Replacement Motor Harness for RV In-Wall Slide-Out - 25' Long
- Shop: Lippert Replacement Motor Harness for RV In-Wall Slide-Out - 20' Long
- Shop: Snap-Top Battery Box with Strap for Group 24 to Group 31 Batteries - Vented
- Shop: etrailer Trailer Tool Box - A-Frame - Aluminum - 3.4 Cu Ft - 34" Long - Matte Black
- Q&A: Are Replacement Parts Available for a Dometic 310 Toilet
- Video: Review of Progressive Dynamics RV Converters - Replacement Converter Section - PD4045CSV
- Video: Review of Go Power RV Power Inverter - Pure Sine Wave Inverter - GP44XR
- Q&A: Battery Box Recommendation to Hold 4 PHR-12200 Batteries
- Q&A: What is the difference between GP44XR 3k Watt Inverter and GP85QR 3,000W Inverter?
- Video: Review of Go Power RV Power Inverter - PowerTrak Single Leg 3000W Pure Sine Wave Inverter - GP75QR
- Video: Review of Go Power RV Power Inverter - PowerTrak Dual Leg 3000W Pure Sine Wave Inverter - GP85QR
- Video: Let’s Check Out the Commercial Grade Battery Box for Group 4D Batteries
- Video: TorkLift PowerArmor Locking Battery Box Review
- Video: DeeZee Specialty Series Trailer Tongue Tool Box Spec Review
Ed L.
1/29/2026
Sounds good, I went ahead and ordered that WattCycle battery. In addition to the battery in the box, I'll add two fuses (one big to the inverter, one smaller to OEM loads that came with the trailer. I'll also put in my victron smart battery sense that helps control the victron smart MPPT solar charge controllers.