Will TS Rails For TruXedo Elevate Rack TH65FR Work With Lomax Professional Series Cover?

Question

Question:

Will these work with the Lomax professional series cover?

asked by: Trent

0

Expert Reply:

Hey Trent,

The TS Rails for TruXedo Elevate Rack # TH65FR will indeed work with the Lomax Professional Series cover, as the cover mounts inside the bedrails. Please note, this is just the rails for the Truck Hero Elevate ladder rack and does not include the rack itself.

What are you planning on mounting on your ladder rack?

expert reply by: Samuel C

0

Trent

2/19/2026

I have an existing Yakima HD Outpost rack that I use for bikes that I am hoping will work with the TS rails.

Samuel C.

2/19/2026

@Trent We've had quite a few people use their Yakima HD Outpost in the TS rails, so you should be perfectly fine. If there's anything else you need, just let me know!

Answer 1

Hey Rick, thanks for the pictures. Sounds like a tough situation but congrats on your new truck. The base rails can be cut on the Thule TracRac SR Sliding Truck Bed Ladder Rack item #TH43003XT-501. This will allow you to install the rack on your 2026…

view full answer...

Answer 2

Hey Chris, Yes, Lomax's hard tri-fold covers clamp to the lip of the bedrails and sit within the bedrails so the TS Rails for TruXedo Elevate Rack System #TH75FR would be a compatible fit.

view full answer...

Answer 3

Hi there Chris, great question. Yes the Redarc #RED87CR is truly a plug and play brake controller for your 2026 Ram 1500. It connects directly to the factory tow controller connector under the dash, so there’s no dealer programming required like you…

view full answer...

Answer 4

Hey, James! We do carry a Tekonsha harness that will work for you. Harness part 3024-P will fit your new 2026 Ram 1500 truck. We are in the midst of updating fitments for the 2026 year so our site may not show it has a fit but I've made sure that…

view full answer...

Answer 5

Hey Steve. The 12.5K Weigh Safe True Tow Weight Distribution Hitch item #WS94RR is going to be the best option for your Jayco trailer. You've done your homework well and with the range of 760 lbs - 1,160 lbs tongue you are not going to want to go…

view full answer...

Answer 6

Hi James! With your GVWR being 7,600 pounds, your loaded tongue weight should be around 760 pounds. With that said, I recommend going with the Weigh Safe True Tow Weight Distribution Hitch - 2" Shank - 6" Drop - 8.5K GTW, 850 lbs TW…

view full answer...

Answer 7

Hey Shawn, congrats on the new 5th wheel trailer. The Watchdog Power Center Surge Protector and Voltage Booster item #HU74ZR is all you're going to need. Adding in the Power Watchdog Surge Protector item #HU82VR would be redundant. The item…

view full answer...

Answer 8

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 9

Hi Donald; the wiring harness that comes with the Curt Echo Under-Dash Bluetooth Brake Controller #C46GV is the Curt Custom Wiring Adapter for Trailer Brake Controllers #C51446. This will allow you to plug your existing Echo into the brake controller…

view full answer...

Answer 10

Hey Rex! Those are some great questions. A weight distribution hitch (WDH) isn't always needed but in your case you will want one. Typically if the weight of your trailer is more than 50% of the weight of your vehicle it is a good idea to use a…

view full answer...

Answer 11

Good thinking, Andy - good name btw. The Watchdog Surge Protector / Voltage Booster 50A #HU74ZR is a hefty unit, but it does sit outside at the pedestal, so security matters. It has a metal loop built in for a padlock or cable lock, which you can run…

view full answer...

Will TS Rails For TruXedo Elevate Rack TH65FR Work With Lomax Professional Series Cover?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching