Are Lomax Hard Tri-Fold Tonneau Covers Compatible With The TS Rails for TruXedo Elevate Rack Systems

Question

Question:

Do these work with a Lomax tri-fold hard cover?

asked by: Chris

0

Expert Reply:

Hey Chris,

Yes, Lomax's hard tri-fold covers clamp to the lip of the bedrails and sit within the bedrails so the TS Rails for TruXedo Elevate Rack System # TH75FR would be a compatible fit.

expert reply by: Kevin C

0

Heather A.

2/17/2026

Hey Chris, how did the TS Rails work out with your Lomax tri-fold cover? Knowing how the fit turned out could help others looking to use the same setup.

Chris

2/17/2026

@HeatherA Worked out pretty good. Not perfect and could definitely be better. Not water/rain secure. There are some procedural caveats too. But not having to do higher rails is much nicer when loading a bike on top. Keeps the load/unload more reasonable.

Answer 1

Hey Trent, The TS Rails for TruXedo Elevate Rack #TH65FR will indeed work with the Lomax Professional Series cover, as the cover mounts inside the bedrails. Please note, this is just the rails for the Truck Hero Elevate ladder rack and does not…

view full answer...

Answer 2

Hey Rick, thanks for the pictures. Sounds like a tough situation but congrats on your new truck. The base rails can be cut on the Thule TracRac SR Sliding Truck Bed Ladder Rack item #TH43003XT-501. This will allow you to install the rack on your 2026…

view full answer...

Answer 3

The Draw-Tite Front Mount Trailer Hitch Receiver part #65075 is a confirmed fit for a 2022-2023 Nissan Frontier Pro 4X. I check with Draw-Tite for you to confirm. It's the same front hitch as the previous generation so that is where there may be…

view full answer...

Answer 4

We do not carry the WeatherTech tonneau covers but according to my research this cover installs completely inside the truck bed of your 2016 Ford F-150. You will need to verify this and it is important that the cover is totally inside your truck bed…

view full answer...

Answer 5

Yes, you can! To add a front hitch to a 2023 Nissan Frontier, I recommend the Draw-Tite item #65075. This front mounted hitch is custom fit and bolts to your Nissan with included hardware. It comes with a 2" receiver that has a 5,000 lbs towing…

view full answer...

Answer 6

In order to use a snowplow on the 2022 Nissan Frontier you'll need a front mount trailer hitch, the Draw-Tite Front Mount Trailer Hitch Receiver part #65075 is currently our only option for this. The hitch does require removal of the lower air…

view full answer...

Answer 7

I am happy to verify for you that your 2023 Nissan Frontier Pro 4X is 100% compatible with the Draw-Tite front hitch that fits, which is the following part number: - Draw-Tite Front Mount Trailer Hitch Receiver #65075 So you will have no issues…

view full answer...

Answer 8

Thanks for the picture! Yes, there are modifications required but all you will need to do to install the Draw-Tite item #65075 on your 2022 Nissan Frontier is to remove the air damn or trim about 1/4 of it away. This piece will sit behind the hitch…

view full answer...

Answer 9

The channel on the Rhino Rack Roof Track, part #RRRTV148 is 0.86 inches (a little less than 7/8 inches) by 0.19 inches (a little less than 3/16ths inch). I've included a diagram showing these dimensions. The upper channel is about 5/8 inches…

view full answer...

Answer 10

We do have a Rhino-Rack set up for the Elevate t-slot rails, and there are two options, one with 65 inch bars and one with 71 inch bars; both of the following come with the feet as well as the crossbars so it's all you'll need. - 65 Inches:…

view full answer...

Answer 11

They sure will! The Rhino-Rack RTC-Style Roof Rack Tracks #RTC14 you were looking at use a standard T-Track dimension that the TruXedo #TX84NV will fit just fine in. With that said the #TX84NV was only tested with specific tracks on tonneau covers so…

view full answer...

Answer 12

Hi Ronaldo; what are you planning to use the rails for? The TS Rails #TH75FR are not compatible with the Lomax Professional Series Hard Tonneau Cover #LOM46JR. To be compatible with the rails it has to be a cover that mounts inside the bed rails and…

view full answer...

Are Lomax Hard Tri-Fold Tonneau Covers Compatible With The TS Rails for TruXedo Elevate Rack Systems

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching