bing tracking image
Q & A Icon

Replacement Red and Amber 4" Marker Lights  

Updated 02/10/2026 | Published 01/24/2026

Question:

I need a couple red 4" marker lights and a couple amber 4" marker lights. The red ones have a single wire and the amber ones have two wires. The have two bulbs per light. Looking to get a close match to my trailer and will go led if I have to.

0

Expert Reply:

Hi Scott; for red and amber incandescent lights you can use the Trailer Clearance or Side Marker Light w/ Reflector # MC44AB (amber) and # MC44RB (red). The red lights have two wires so you will need to run the ground to the frame. Your current red lights probably gound through the hardware.

The one thing these do not have is two bulbs each, they're single bulb lights. The mounting holes are 3" apart on center, and they're 1-1/2" tall so you can check to see if that matches as well. If it doesn't, or if you're looking for a slightly different style, let me know in the comments below.

expert reply by:
0
Robin H
Optronics MC44 Measurements
Optronics MC44 Measurements
(click to enlarge)
MC44AB
MC44AB
(click to enlarge)
Robin H. profile picture

Robin H.

2/10/2026

Hey Scott, did the red and amber marker lights you tried end up matching your trailer’s setup? Your feedback could help others looking for a similar fit.

Scott W. profile picture

Scott W.

2/10/2026

@RobinH I need 4" wide duel bulb light red marker lights with one wire and amber ones with deul bulbs and two wires. I don't think you have thrm

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>