Correct Replacement for Glo Brite Marker Lights 118A and 117R

Question

Question:

I need both red and amber Glo Brite replacement marker lights. Both of mine are 118a/117r. What are your replacement numbers for amber and red?

asked by: Eric D

0

Expert Reply:

The correct replacements we offer for the Glo Brite Marker Lights 118A and 117R is the Trailer Clearance or Side Marker Light part # MC44AB for amber and part # MC44RB for red.

expert reply by: Conner L

0

Bert

3/6/2025

Is there a 6 diode , 2 wire replacement for these

Jesse M.

3/6/2025

@Bert We do have a 6 diode 1 wire option. Take a look at the following: - Optronics LED Trailer Clearance or Side Marker Light w/ Reflex Reflector - 6 Diodes - Red Lens # MCL44RB - Optronics LED Trailer Clearance and Side Marker Light w/ Reflex Reflector - 6 Diodes - Amber Lens # MCL44AB1

Answer 1

For your Glo-Brite 118A amber light the replacement lens that will fit is the Optronics #A44AB; the lights themselves are the Optronics #MC44AB. The Glo-Brite 117R can use replacement lens #A44RB while the light is #MC44RB. I've added links to…

view full answer...

Answer 2

The bulb type of the Glo Brite 118A/117R you have is a 194 so for an LED you'd just want the #DI88VR.

view full answer...

Answer 3

The Fulton Single Axle Trailer Fender #F008594-2 does have a 4-1/8" wide mounting bracket slot, so they will fit nicely with the 4" wide brackets on your McClaine trailer. The mounting holes on the fender are 3-3/4" apart though, so…

view full answer...

Answer 4

The replacement key part #GL26FR is the correct key as it fits the key codes FIC HF, EF, and CF codes.

view full answer...

Answer 5

The best replacement option we offer for an Atwood RV Water Heater (6 or 10 Gallon) is tankless, the Furrion RV Tankless Water Heater part #FR68SR. It won't be a direct replacement but still pretty easy nonetheless as they are very similar. That…

view full answer...

Answer 6

We don't have the specific pin, but I have a solution for you. Since Breakaway Switches are universal, I recommend you replace the entire switch with part #3802348 to go with your ESCO breakaway systems.

view full answer...

Answer 7

The Trailer License Plate Holder with LED Light #328-003-71BE uses non-submersible lights. Although this would not work well on your boat trailer, I have a different solution. I recommend using the LED Trailer License Plate Light #LPL82CBB. This…

view full answer...

Answer 8

The correct replacement motor for your Model 28 Kwikee steps manufactued in 2000 is the part #LC379608. Thank you for including the photo, that always makes things easier. I've linked to a product description video featuring the #LC379608…

view full answer...

Answer 9

Part of the play you're experiencing is from the pintle connection on the B&W Tow & Stow Pintle Hook with 2" Ball - 2" Hitches #BWTS10055 and part of it is the tolerances built in for the shank to the receiver - both are common…

view full answer...

Answer 10

The air bag kit I recommend for a 2019 Ram 2500 is the Air Lift LoadLifter 7500 XL Air Helper Springs part #AL57589. This kit offers a bolt-on install and is compatible with in-bed hitches. I have attached an install video I did below. It comes with…

view full answer...

Answer 11

Electric trailer brake magnets only have a power wire and a ground wire (doesn't matter which is which). The power wires will attach to whichever of the 3 wires carries the brake signal from the brake controller. One of the other wires must be a…

view full answer...

Answer 12

As the Blue-Ox Replacement Triple-Lug Brackets #BX88154 will not fit your discontinued BX7330 Aventa Tow bars. I recommend changing to the Blue Ox Alpha 2 Non-Binding Tow Bar #BX7380. This tow bar is rated for up to 6,500lbs and with the non-binding…

view full answer...

Correct Replacement for Glo Brite Marker Lights 118A and 117R

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching