Does the etrailer Hitch e98848 Fit a 2026 Honda CR-V Hybrid?

Question

Question:

You put this on a 2024 CRV hybrid will it fit my 2026 hybrid?

asked by: Michael H

0

Expert Reply:

Yes, it will Michael. The etrailer Hitch item # e98848 has been confirmed to fit all models of the 2026 Honda CR-V, including the hybrid. This is a class III hitch with a 2" receiver that comes with all hardware necessary for installation.

The etrailer Hitch item # e98848 has a 3,500 lbs towing capacity and a maximum tongue weight of 525 lbs. It's going to be great for towing a small trailer or using an accessory like a bike rack or cargo box.

What do you plan on using a hitch for?

You can add this information, along with any other questions you have, where it says Reply to Jerred H.

expert reply by: Jerred H

0

e98848
(click to enlarge)

Michael H.

12/29/2025

Thanks for the quick response! I have a small trailer 4X5 that I load my camping gear into, also I have a 4 bike, hitch bike carrier.

Jerred H.

12/29/2025

@MichaelH You're welcome! The etrailer Hitch item # e98848 is definitely going to handle a small trailer and will be perfect for a bigger 4-bike bike rack. To control your trailer's lights you'll also need the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # C56370.

Helpful Links

tv-install-curt-trailer-wiring-2024-honda-cr-v-c56370.aspx

Brian

12/31/2025

@MichaelH the hitch works fine. the installation was not exactly right. i needed to use an angle grinder/cut off whirl to grind away and remove some metal at the forward facing top of the receiver in order to get it to sit flush under the 2024 Honda CR V

Charles

12/31/2025

It fit well. I installed by myself. Just be careful about the trunk release sensor.

Chris

1/1/2026

@Charles Did you install this hitch on a 2026 Honda CRV? If so, then I would be very interested to know if there were any differences from the 2025 install video provided by etrailer I just received the hitch and could use any advice/tips before I start the install. Thanks!

Answer 1

Hey Manning, the etrailer hitch part #e98848 that you referenced does fit the hybrid models and also will allow the hands free liftgate to still function but you will need to kick to either side of the hitch opening. Then for trailer wiring you'd…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hey Frank! This is a newer product, so there aren't many long-term owner reviews available yet. That said, we have done extensive testing on the Benton MoveHitch #B86VR. A strain gauge was used to measure the forces the carrier experiences during…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

Hey Erica, thanks for reaching out! Since your 2026 Honda CR-V is a Hybrid we're a bit limited on the hitch options, and you'll need to get one that does require some fascia cutting. For this, I recommend the etrailer Trailer Hitch Receiver…

view full answer...

Does the etrailer Hitch e98848 Fit a 2026 Honda CR-V Hybrid?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching