What is the Differences Between TowReady T-One # 118329 and Curt # C55329 Wiring Harnesses

Question

Question:

What is the difference between part# 118329 and C55329? I have a 1999 Dodge Dakota. Thanks.

asked by: Jon W

0

Expert Reply:

The two products you compare, 4-pole trailer wiring harnesses # 118329 and # C55329, are functionally the same and connect to your 1999 Dodge Dakota in exactly the same way. Both take stop/tail/turn light signals from your Dakota and through plug-in connectors that attach underneath the vehicle deliver these lighting signals to your trailer. Both are equipped with a flat 4-pole trailer connector.

expert reply by: Adam R

0

Answer 1

Hey Bob! We are ahead of manufacturer fitment pretty often, and have confirmed that the Demco Tabless Base Plate Kit #DM38CV will fit the 2026 Maverick Hybrid. Our own etrailer Invisible Base Plate Kit #e96GV shares the same design so you can use…

view full answer...

Answer 2

The Curt Trailer Hitch Receiver #C13280 and etrailer Trailer Hitch Receiver #e53AR are very similar in their design. Both receivers will attach to the same points on your 2001 Dodge Dakota. There are some slight differences in the construction with…

view full answer...

Answer 3

The Tow Ready #118329 T-One vehicle wiring harness you referred to is indeed the correct trailer wiring harness for your 1999 Dakota. The trailer wiring harness plugs inline with the vehicle wiring harness that feeds the truck's taillight…

view full answer...

Answer 4

A good compatible pole-tongue adapter for you and your Curt TruTrack Weight Distribution System #C17499 is the Reese Pole-Tongue Adapter #RP3280. Since this pole adapter has a capacity of 7,500 lbs GTW and 750 lbs TW, it will also help you avoid…

view full answer...

Answer 5

The Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class V - 2" #41923 for your 2002 Dodge Ram is made in Mexico. It is made to US standards and Draw-Tite is an American company. If you are wanting a USA manufactured trailer hitch,…

view full answer...

Answer 6

I have a solution for you, but the CIPA Magna Mirrors are not heated. The similar heated version of this mirror are the K-Source mirrors #KS60179-80C.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The longest option is going to be the Malone Axis Truck Bed and Roof Load Extender for 2" Hitches #MPG907, which has a 53" length from the hitch pin hole to the furthest point on the extender. This extender comes with a 375lb load capacity…

view full answer...

Answer 9

The Malone Axis Truck Bed and Roof Load Extender for 2" Hitches - 375lbs Item #MPG907 has load stops that can adjust from 28" to 48" so you'll have a very snug fit hauling your 4' wide plywood.

view full answer...

Answer 10

Of your options they all are going to get the job done. If you're wanting something that looks the best I would go with the Yakima LongArm Extender #Y01149. If you're not concerned with the looks go with the Malone Axis #MPG907. It has more…

view full answer...

Answer 11

In order to install a 7-way trailer connector on a 2001 Dodge Ram 1500 you have a few options which will be dependent on if the truck was equipped with a factory 7-way trailer connector or not. If so, then you can use the 7-Way Pre-Wired Car…

view full answer...

What is the Differences Between TowReady T-One # 118329 and Curt # C55329 Wiring Harnesses

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching