Result: modulite

Hey Eddie, the Curt hitch part #C22RJ and the Trailermate part #TMT29FR are both very similar in design and capacity. I really like the Curt hitches and recommend them whenever available but Trailer Mate isn't bad either. If you are wanting the…

I do have some options for you but there isn't a plug under the dash for a trailer brake controller on a 2023 Chevrolet Traverse. Therefore, if you want to use a traditional dash mounted trailer brake controller you must hardwire which requires…

To install a 7-blade in your 2017 Chevy Express van, presumably for a brake controller, you are going to need to do some hard wiring. For a brake controller the first thing you'll need is to add 4-way #118392 and I've added a link to a video…

The Tow Ready #118329 T-One vehicle wiring harness you referred to is indeed the correct trailer wiring harness for your 1999 Dakota. The trailer wiring harness plugs inline with the vehicle wiring harness that feeds the truck's taillight…

A good compatible pole-tongue adapter for you and your Curt TruTrack Weight Distribution System #C17499 is the Reese Pole-Tongue Adapter #RP3280. Since this pole adapter has a capacity of 7,500 lbs GTW and 750 lbs TW, it will also help you avoid…

On a 2007 Ford F-150, you should not need to remove any panels. It should be right by the center section of the dash, by the radio. Go back towards the firewall, and you should find it to the right of the gas pedal arm, but closer to the driver than…

To install a 7-Way harness on your 1996 Dodge Ram without the factory connector, you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Curt T-Connector…

The two products you compare, 4-pole trailer wiring harnesses #118329 and #C55329, are functionally the same and connect to your 1999 Dodge Dakota in exactly the same way. Both take stop/tail/turn light signals from your Dakota and through plug-in…

I do have some replacement trailer axle options for you but in order to determine the correct replacement you'll need to measure the length which is done from the face of each hub. This when combined with the capacity can then be used to…

For your 2003 Sun Valley RoadRunner travel trailer, the #10 torflex axle will use lift kit #K71-707-01 if your axle is rated for 2,300 to 4,000 lbs. If you have a #9 Torflex axle with 2,000 lb capacity then you will want #K71-723-01. We also tandem…

For your 3,500 lb Dexter Torsion axles, you will want to use the Torflex Lift Kit - Tandem Axle - 2-5/8" Lift #K71-707-02. This will provide an additional 2-5/8" clearance. The distance between the mounting bolts is 8 inches center on…

Hey Cory, thanks for reaching out! I'd be more than happy to help you get your 1999 Dodge Ram 2500 set up for trailer towing! Here are the parts you'll need: - T-One Vehicle Wiring Harness #118329 - Universal Wiring Upgrade #ETBC7 - Mount…