Swapping 5 Lug Hub Drum for EZ Lube Spindle with 6 Lug Hub Drum for Standard Spindle
Updated 06/26/2014 | Published 06/24/2014
Products Featured in This Question
Question:
I have two trailers, one with EZ Lube hubs and 5 bolts, another without EZ Lube and 6 bolts both systems were purchased from you. Id like to swap the drum/hubs so that I can use 6 bolt wheels on the trailer that now has 5 bolt hubs. Is there any issue with swapping EZ Lube hubs and non EZ lube hubs? Other than of course losing the EZ Lube capability. Thank you
asked by: Bob T
Expert Reply:
If both hubs are compatible with the same bearings and you can find a seal compatible with the diameter of the hub bore and the journal surface of the spindle, you can swap the hubs from the EZ lube to the regular spindle. Since the EZ lube system is contained in the spindle, it doesn't matter to the hub.
I looked at your order history, and saw that the 5 lug hub/drum you previously purchased was part # AKHD-545-35-EZ-K. This hub uses a # L68149 inner and a # L44649 outer bearing and a 10-9 seal. For a 6 lug on a 5-1/2 inch bolt circle wheel, you can swap it with a # 84656UC3, which is designed for a standard spindle.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased
- Video: etrailer Easy Grease Trailer Idler Hub Assembly Review and Installation
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Timken Bearing Kit for 3,500 lb Axles with #84 Spindle - Bearings L44649/L68149
- Q&A: Pre-Greased Hub Assembly with L44649 Inner and Outer Bearings
- Q&A: Replacement Trailer Hubs Using L68149 and L44649 Bearings
- Video: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles Review
- Q&A: Radial Tire Recommendation for Size ST205/75D15 Replacement
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 6 on 5-1/2
- Video: Trailer Axle with Idler Hubs Spec Review
- Video: Trailer Axle Beam with Easy Grease Spindles Review
- Shop: Trailer Axle Beam with Easy Grease Spindles - 89" Long - 6,000 lbs
- Shop: Timken Replacement Trailer Wheel Bearing - 25580 - Qty 1
- Q&A: Can 5-Lug Hub Be Upgraded to 6-Lug Hub
- Search Results: trailer tires and wheels
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer wiring
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Shop: Suspension Enhancement
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: trailer jack
on Trailer Hubs and Drums
