Will the InfiniteRule Hitch Lock for 2" Toyota Tacoma Hitches Fit a 2025 Lexus GX550?

Question

Question:

Will the InfiniteRule IR75FR fit a 2025 Lexus GX550 Overtrail+ ? Thanks

asked by: Mark K

0

Expert Reply:

Yes, it will Mark. The InfiniteRule Hitch Lock for 2" Toyota Tacoma Hitches item # IR75FR has a longer span to accommodate the Toyota hitch receiver. Which they've recently started expanding to other vehicles besides the Tacoma. You will most likely need to remove the access cover attached to the bumper to get the lock into the hitch pin hole.

Do you tow a trailer with your Lexus or are you using your hitch for an accessory like a bike rack or cargo carrier?

You can add this information, along with any other questions you have, where it says Reply to Jerred H.

expert reply by: Jerred H

0

InfiniteRule Hitch Lock
(click to enlarge)

Jerred H.

12/29/2025

Hey Mark, how did the InfiniteRule hitch lock work out on your GX550 Overtrail+ once you removed the access cover? Your update could make it easier for others setting up the same hitch.

Answer 1

Hello Hal, Great question! It really would be nice if Toyota kept their receiver the same size as everyone else’s so any standard 2" lock would fit. The good news is that Infinite Rule actually made a lock specifically for the 2024+ Toyota…

view full answer...

Answer 2

The factory installed hitch on the Tundra is wider than a typical 2 inch receiver, so a normal 2 inch hitch lock won't fit. We offer an extended length lock, part #e98881. Multiple locks are available keyed alike, use the drop-down box on the…

view full answer...

Answer 3

From what I can tell it sounds like you are needing a hitch lock to secure your ball mount to your trailer hitch receiver to replace the pin. We do have that, with the right one just depending on the size of your trailer hitch: - 1-1/4" Hitch…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Will the InfiniteRule Hitch Lock for 2" Toyota Tacoma Hitches Fit a 2025 Lexus GX550?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching