Trailer Hitch Lock to Secure Ball Mount to Trailer Hitch Receiver

Question

Question:

I am looking for a lock to secure the hitch ball shaft to the trailer hitch. I know they exist as I saw one advertised but cannot find the retailer. Appreciate it.

asked by: David R

0

Expert Reply:

From what I can tell it sounds like you are needing a hitch lock to secure your ball mount to your trailer hitch receiver to replace the pin. We do have that, with the right one just depending on the size of your trailer hitch:

- 1-1/4" Hitch Receiver: Trailer Hitch Receiver Lock # e98879

- 2" Hitch Receiver: Trailer Hitch Receiver Lock # 1480DAT

- 2-1/2" Hitch Receiver: Trailer Hitch Receiver Lock # 1469DAT

- 3" Hitch Receiver: Trailer Hitch Receiver Lock # 34061074-D

expert reply by: Kyle S

0

Answer 1

Yes, it will Mark. The InfiniteRule Hitch Lock for 2" Toyota Tacoma Hitches item #IR75FR has a longer span to accommodate the Toyota hitch receiver. Which they've recently started expanding to other vehicles besides the Tacoma. You will most…

view full answer...

Answer 2

Hello Hal, Great question! It really would be nice if Toyota kept their receiver the same size as everyone else’s so any standard 2" lock would fit. The good news is that Infinite Rule actually made a lock specifically for the 2024+ Toyota…

view full answer...

Answer 3

The factory installed hitch on the Tundra is wider than a typical 2 inch receiver, so a normal 2 inch hitch lock won't fit. We offer an extended length lock, part #e98881. Multiple locks are available keyed alike, use the drop-down box on the…

view full answer...

Answer 4

The only way to avoid using a reducer sleeve like the Curt #C45408 is to get a ball mount with a 3" shank and for that I recommend checking out the B&W Tow & Stow 3-Ball Mount #BWTS30049B which comes with the 3 common hitch ball sizes…

view full answer...

Answer 5

To lock your B&W Tow & Stow 3-Ball Mount #BWTS30049B to your truck you actually only need one single locking hitch pin and for that I recommended checking out the InfiniteRule Hitch Lock #34061073-D which is a stainless steel construction.…

view full answer...

Answer 6

Hey Charles, The Brophy #BH20 has a 13-1/4" from center of hitch pin hole to center of ball hole, which is a bit more than the B&W Tow & Stow ballmounts have so the closest option is going to be the B&W Tow & Stow 2-Ball Mount…

view full answer...

Answer 7

Hey William, so the 3 inch hitches do use the larger hitch pin diameter but the 2-1/2 inch hitches still use the smaller one. So with a reducer like the part #38735 technically you would use both sizes. If you check out the picture I attached you can…

view full answer...

Answer 8

For the 3 inch hitch of your 2021 Ford F-350 to determine if you need the 4-1/2 inch drop Tow and Stow part #BWTS30048B or the 7-1/2 inch drop part #BWTS30049B will be based largely on the trailers you plan to tow and how tall the coupler sits from…

view full answer...