See what our Experts say about this Master Lock Trailer Hitch Lock

• How Long is Hitch Pin For Thule Snug Tite Hitch Lock
  Hey Michael, The Threaded Hitch Pin for Thule Snug Tite Hitch Lock # TH62RE is 4-1/2" long overall, with the threaded portion being 1-3/8" and the rest being 3-1/8". It is longer than most, which are often 3-1/2" or so, and I know Toyota users have had success with it in the past. That said, it's important to note that this is a replacement part for the Thule Snug Tite Hitch Lock and Anti-Rattle Device # THSTL2 and is threaded for Thule racks. If you have a different brand bike rack...
  view full answer...
• Can Master Lock Hitch Locks 1480DAT And 1469DAT Be Keyed Alike?
  Hello Oliver, thanks for reaching out. We can provide both the locks you mentioned, the Master Lock # 1480DAT and # 1469DAT, but I am sorry to say we do not offer a keyed-alike option for these. Both would come with a random key number. If you need a hitch lock that works with 2" and 2-1/2" hitches and can be keyed alike, we do have the following: - etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches - Flush - 3-5/8" Span - Chrome # e98881 You can order as many of these as you need,...
  view full answer...
• Recommended Air Bags for a 2026 Chevy Silverado 2500 and How to Perform Maintenance
  Hey George, congrats on the new truck! You are definitely going to need to support the axle when lifting your Silverado with the Pacbrake Alpha HD Pro Air Bag Suspension Kit item # PB25RV. Lifting your truck by the frame will stretch the bags too far if you don't support the rear axle. This is a common issue amongst all brands of air bag kits. You'll want to make sure whoever is servicing your truck knows to support the axle or not put it on a lift. What are you planning on towing with...
  view full answer...
• Will The Master Lock Trailer Hitch Receiver Lock 1479DAT Fit A 2026 Toyota Land Cruiser OEM Hitch?
  Hi Andrew! The Master Lock Trailer Hitch Receiver Lock - Swivel Head Design - 2" Hitches # 1479DAT has 2-3/4" of useable space, but I think I would go with one that has a little more just to be on the safe side. With that said, if I were doing this, I would go with the Master Lock Stainless Steel Trailer Hitch Lock for 2-1/2" Receivers # 1469DAT. This has 3-1/4" of useable space, but the same 5/8" diameter pin. Toyota is notorious for having thick hitches and with this one you may end...
  view full answer...
• Hitch Pin Lock Recommendation for Tesla Model Y
  Hey Shirley, the anti rattle hitch lock part # HLT would work on a Tesla Model Y and won't interfere with the electrical box but it would only work with a Kuat Transfer bike rack. Is that what you have or are you looking for a hitch lock that is similar that is more universal in what it can fit? If so, the Master Lock hitch pin lock part # 1469DAT is very similar and would work great for that.
  view full answer...
• Best Hitch Pin Lock for 2-1/2 inch Trailer Hitch
  Hey Dave, I really like the InfiniteRule Hitch lock part # 34061072-D that you referenced for a 2-1/2 inch hitch. It's made of stainless steel and also in the US, plus our customers have let us know how much they like it so it would work great for you. The only other option I would recommend considering is the Master Lock part # 1469DAT as it has a 90 degree lock cylinder which can be easier to access if the area around the hitch pin is tight. This is also made of stainless steel.
  view full answer...
• Cushioned Shank For Use With Equal-i-zer Weight Distribution System
  We do have an option for you, though there isn't a standalone cushioned ball mount like the Curt Rebellion XD Shock Absorbing Adjustable Ball Mount # C45949-22516 that is compatible or rated for use with a weight distribution system. What you can use instead is a cushioned shank that is compatible with your Equal-i-zer weight distribution system; the Gen-Y Torsion Weight Distribution Shank will mount directly in your trailer hitch and you'll simply replace your Equal-i-zer's shank with...
  view full answer...
• Trailer Hitch Lock to Secure Ball Mount to Trailer Hitch Receiver
  From what I can tell it sounds like you are needing a hitch lock to secure your ball mount to your trailer hitch receiver to replace the pin. We do have that, with the right one just depending on the size of your trailer hitch: - 1-1/4" Hitch Receiver: Trailer Hitch Receiver Lock # e98879 - 2" Hitch Receiver: Trailer Hitch Receiver Lock # 1480DAT - 2-1/2" Hitch Receiver: Trailer Hitch Receiver Lock # 1469DAT - 3" Hitch Receiver: Trailer Hitch Receiver Lock # 34061074-D
  view full answer...
• Does Master Lock Hitch Lock for 2-1/2 Receivers Come Keyed Alike?
  There is a hitch receiver lock which fits 2-1/2" hitch that can be keyed alike, though the Master Lock # 1469DAT cannot be. I recommend taking a look at our etrailer.com lock # e98881, which is made from 15K stress-proof steel, is double chrome plated to provide rust resistance, and has weather grips for better handling in the elements. To get these locks all with the same key, just choose the "keyed alike" option in the drop-down box, and add the number you need in the "quantities" box. I've...
  view full answer...
  
• Extra Long Locking Trailer Hitch Pin for 2015 Toyota Tundra
  The factory installed hitch on the Tundra is wider than a typical 2 inch receiver, so a normal 2 inch hitch lock won't fit. We offer an extended length lock, part # e98881. Multiple locks are available keyed alike, use the drop-down box on the product page. We don't carry a lock with the part number you mentioned, so I tried looking it up online and found no result. I'm not sure where you'd be able to get a longer pin for your particular lock.
  view full answer...
• Troubleshooting Jammed Key in Master Lock Stainless Steel Trailer Hitch Lock
  If the key is jammed in the Stainless Steel Trailer Hitch Lock # 1469DAT then try using some lubricant like WD40. Spray the lock and let it sit for a bit before trying to wiggle the key free. If you are still struggling to get it free then you either need to contact your local locksmith or simply replace the unit. This lock and key set does come with a limited lifetime warranty so that may be worth looking into as well.
  view full answer...
• Hitch Lock for Roadmaster Spare Carrier # RM-195225
  For a hitch pin lock that you could use with the # 1469DAT in the Roadmaster Spare Carrier part # RM-195225 to prevent anyone from walking off with the carrier and your spare.
  view full answer...
• Are Master Lock Hitch Lock for 2-1/2 inch Receivers Capable of Towing a 11,000 Pound Gross Trailer
  The Stainless Steel Trailer Hitch Lock for 2-1/2 inch Receivers, item # 1469DAT, is rated at 10,000 pounds for Class III or IV hitches. You will need to check your hitch and make sure that it does not have washers welded to the sides of the hitch around the pin hole. If this is the case, the # 1469DAT lock will not fit. Another 2-1/2 inch we have had excellent results with is our etrailer.com Lock Flush Design for 2-1/2 inch Trailer Hitches, item # e98881, customer reviews are excellent...
  view full answer...
• Does Every Masterlock Stainless Steel Trailer Hitch Lock # 1469DAT Have the Same Lock/Key Combo
  I spoke with my contact at Masterlock and she informed me that there are 1,400 unique key and lock combinations for the Stainless Steel Trailer Hitch Lock # 1469DAT that you referenced. Chances are if there was someone out there with the same lock as this he would not be able to unlock your # 1469DAT. I attached a review video for this product for you to check out also.
  view full answer...
• Recommended Anti-Rattle Device For a 2" Receiver For Trailer Towing
  Yes, the Curt Anti-Rattle Kit for Hollow Shank # C69HR will hold up when pulling your equipment trailer. This will only work on ball mounts for a 2" receiver with a hollow shank. I feel the Blue Ox Hitch Receiver Immobilizer II # BX88224 is the best for durability. It will also allow you to use a Hitch Lock # 1469DAT to secure your ball mount if you prefer to leave it in your receiver.
  view full answer...
• Is Convert-A-Ball Ball Mount # AMSC12 Compatible With Hitch Lock # 1469DAT?
  Yes, the Convert-A-Ball Ball Mount # AMSC12 can be used with the Stainless Steel Trailer Hitch Lock # 1469DAT. The hitch pin is 5/8" in diameter to fit in your receiver with the ball mount.
  view full answer...
• Locking Hitch Pin Recommendation for a 2015 Ram 2500 with 2-1/2 inch Hitch
  The span or usable portion of the Masterlock Hitch Lock part # 1469DAT that you referenced is 3-1/4 inches. If you need only 3-1/8 inches this lock would work well for you. Check out the review video I attached as well.
  view full answer...
• Locking Hitch Pin Rated for at Least 14,000 Pounds for a 2015 Ford Super Duty
  Locking hitch pin # e98881 is designed for 2-1/2 inch hitches and is made using 15,000 pound stress proof steel. This sounds like the best option based on your needs. I have included a link to a video review of this locking pin for you to the right.
  view full answer...
• Coupler Lock and Trailer Hitch Receiver Lock for 2-1/2 Inch Hitch
  There is not a lock set like the one you mentioned which has the coupler locks and works with a 2-1/2 inch trailer hitch, so you would need to the hitch receiver lock and coupler locks separately and have two sets of keys for the locks. What you would need are: - Master Lock Coupler for 1-7/8", 2", 2-5/16" Couplers # ML389DAT - Stainless Steel Trailer Hitch Lock for 2-1/2" Receivers by Master Lock # 1469DAT I have added links to video reviews of both parts for you to check out as well.
  view full answer...
• Compatible Locking Hitch Pin to fit a 2012 Toyota Tundra with OEM Trailer Hitch
  The hitch on your 2012 Toyota Tundra uses a hitch pin the will work with the 2-1/2 inch receiver. Even though your receiver opening is 2 inches the pin will compensate for the extra width in the design of the Toyota OEM hitch. The Master Lock Stainless Steel Trailer Hitch Lock, # 1469DAT, will work in the OEM hitch. However, this pin cannot be keyed to use your Toyota's ignition key. The BOLT Trailer Hitch Receiver Lock for 2 and 2-1/2 Inch Hitches, # BL7023584, can use your Toyota's...
  view full answer...
  
• Recommended Trailer Hitch Ball Mount With 1 Inch of Rise
  With your measurements you will need a ball mount with 1-1/4 inch of rise, though you can be within a half-inch of that and we do have some good options. You said 2-5/16 inch receiver, so I assume you mean that's the hitch ball size your coupler takes, but I'm not sure if your have a 2 inch or 2-1/2 inch receiver on your 2004 Chevy Silverado so I'll list options for ball mounts for both. - 2 Inch Receiver: Convert-A-Ball Ball Mount # AMSC2HD To mount to your hitch receiver it also requires...
  view full answer...
• Will Master Lock Trailer Hitch Lock # 1469DAT Fit 2007 Toyota Tundra With Factory Tow Package
  The Master Lock Stainless Steel Trailer Hitch Lock, part # 1469DAT, is an oversize lock that is designed to work on the Toyota Tundras with the HD tow package. It has an inside pin length of 3-1/4 inches. Another popular lock that will work on the Tundra is the Extra Long Hitch lock, part # e98881. This lock has an inside pin length of 3-5/8 inches. Both of these locks will work on your 2007 Toyota Tundra with Factory Tow Package.
  view full answer...
• Need Stainless Steel Hitch Pin for 2-1/2-inch Class V Trailer Hitch Receiver on 2011 Silverado
  We do offer a stainless-steel hitch lock suitable for the 2-1/2-inch Class V factory-installed hitch on your 2011 Silverado. TowReady lock # TR63253 features a stainless-steel pin and a chrome-plated lock assembly. The linked video will help to illustrate its features and operation. This lock has a 3-1/2-inch-wide center span and includes 2 keys. The lock you referenced, etrailer.com part # e98881, has a center span of 3-5/8-inches and will fit a Class V 2-1/2-inch hitch receiver, but...
  view full answer...
• Fit of Master Lock # 1469DAT on 2010 Ford Explorer XLT
  If your Explorer has the OEM 1-1/4 x 1-1/4 hitch, the lock will NOT work. If you have the 1-1/4 inch receiver, you would need a lock with a 1/2 inch diameter pin, like the etrailer Lock # e98880. The Master Lock Stainless Steel Trailer Lock you asked about, part # 1469DAT is specifically designed for a 2-1/2 inch receiver, but its 5/8 inch pin would work in a 2 x 2 inch Class III hitch. You can confirm this by measuring the width of your receiver tube at the hitch pin hole. If this width...
  view full answer...

Do you have a question about this Trailer Hitch Lock?