Can I Install a Hitch on my 2022 Lexus RX 350 Without Having to Cut My Bumper

Question

Question:

Im looking for a hitch that will fit my 2022 Lexus RX350 without having to do any cutting on the lower bumper panel.

asked by: Sam S

0

Expert Reply:

Thanks for your question, Sam.

After looking at all the hitches we offer and how they install, all of them would lead to needing to do some sort of cutting to the bumper in some way. Our website doesn't state that the EcoHitch would need trimming, but based off it's design and comparing them to the other we carry, you would still need to do some trimming for hitch part # EH95KR.

expert reply by: Gwendolyn Y

0

Gwendolyn Y.

12/1/2025

Hey Sam, were you able to move forward with the EcoHitch for your RX350 after learning that some trimming would still be needed? Knowing what you decided could help others trying to avoid bumper modifications.

Sam S.

12/2/2025

@GwendolynY since it took you so long to respond I purchased a hitch from U Haul. It did require some minor trimming of the bumper cover panel but is not noticeable with the hitch installed.

Answer 1

Hey Dave, You do not have to cut the bumper when installing the EcoHitch #EH95KR. The hitch is going to install behind the bumper, you may have to temporarily remove the fascia or trim it some but no major cutting or drilling needed for install. Once…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 11

Hi John! We definitely have hitches available for your 2026 Lexus RX350h and the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e29ZV is a great option. The matte finish makes our hitches blend in better than…

view full answer...

Answer 12

Hey Bob. To install the ground on the Curt T-Connector Vehicle Wiring Harness item #C36PQ you'll want to find a flat metal spot near the converter. You can take a wire brush and clear away the paint to ensure you reach bare metal. Then you'll…

view full answer...

Can I Install a Hitch on my 2022 Lexus RX 350 Without Having to Cut My Bumper

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching