Search: wiring harness   >  

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I recommend the EcoHitch Stealth Trailer Hitch Receiver #EH45SR for your 2024 Hyundai Elantra Blue hybrid as the Draw-Tite #DT75MR will not fit. The EcoHitch is a great option as it has the removable 2" receiver opening allowing for a larger…

Hi George, We can get your 2024 Kia Telluride a 7-way, but I checked with our manufacturers and unfortunately there isn't a plug-in option like you were wanting. So you would need a couple parts to add a 7-way, with the first one depending on the…

Hey Dave, There should be no drilling required to install the etrailer Invisible Base Plate Kit #e44FV, but there is a small section where you'll need to cut a little notch out of the bumper in order for the baseplate to fit.

Hey Mike, the Curt #C29ZV does fit your 2023 Kia Telluride Xline that does have the LED taillights.

Hi Brian, You sure can; we have the BRKT-4088 under a different part number for website purposes, but I can verify that hardware BRKT-4088 is the Replacement Installation Hardware Kit for Aries Grille Guard #AA62FB.

Hey Sandy, yes we have trailer wiring that can be used with your 2011 Nissan Murano and the etrailer hitch part #e65AR. The kit I recommend is the Tekonsha part #118653 as it has the easiest install and the most reliable converter box.

As long as you don't exceed the 300 lb tongue weight capacity of the #306-X7178 hitch (which includes the 80 with the #306-X7178 EcoHitch for a 2014 Toyota Prius. I've linked to an installation video for the hitch as well as to a product…

Hey Ken, so the light bar part #HLY54RR that you referenced was designed specifically to fit the Hollywood Racks Destination part #HLY66ZR but I am sure if you wanted to make it work it would be possible.

To add a hitch to your 2024 Jeep Grand Cherokee L, I recommend the Draw-Tite item #DT42GR. This hitch is custom fit and bolts to your Jeep with included hardware. This is a class III hitch with a 2" receiver. It has a 7,500 lbs towing capacity…

If your 2020 Kia Sorento has the factory tow package, there will be a tail light wiring connector behind the rear tire of the driver side, on the outside of the frame rail. As shown in the attached photos, an underbody cover will need to be removed…

To determine if a 2017 Toyota HIghlander has a factory towing harness, start by opening up the rear hatch. Then, lift up on the rear compartment panel and pull it out. Remove the two driver-side panels by pulling up on them. There, you may see a…