Replacement Bearing Kit for Dexter 7,000 lbs Axles
Updated 12/01/2025 | Published 11/02/2025
Products Featured in This Question
Question:
Hello- I have a 2007 RandW 14k capacity trailer. There are two 7k capacity axles and I understand that they are dexter 7k capacity axles. There are no markings on the axles. I am looking to determine what bearing and race seal kit to buy. Is there any further help you can provide? Thanks,
asked by: Ryan Q
Expert Reply:
Hey Ryan, thanks for the information. We have two different bearing kits for Dexter 7,000 lbs axles. Item # BK3-210 and item # BK3-200 which has a a slightly larger grease seal. The bearings and races are the same size in both kits. Each kit will replace one hubs bearings, races, and seals.
What you'll need to do is measure your spindle where the grease seal rides for it's inner diameter. That spot is labeled B on the diagram below. If it's 2.125" you need item # BK3-210. If it's 2.25" you will need item # BK3-200.
If you have any additional questions, go ahead and click on the box that says Reply to Jerred H and I'll be happy to answer them.
(click to enlarge)
Product Page this Question was Asked From
Curt Channel-Mount Coupler - Squeeze Latch - 2-5/16" Ball - 15,000 lbs
- Adjustable Trailer Coupler
- Coupler Only
- 3 Inch Channel
- 15000 lbs GTW
- 2-5/16 Inch Ball Coupler
- Trigger Latch
- Powder Coat Finish
- CURT
more information >
Continue Researching
- Search Results: wacko ac silencer
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Q&A: Bearing Kit for 2024 Brinkley G3500 With 7k Axles
- Shop: Replacement Bolt Kit for Curt Helux Coil-Spring Pin Boxes
- Search Results: wheel bearing
- Search Results: front jacks
- Search Results: morryde x~factor crossmember
- Search Results: lippert ground control
- Search Results: lube plate
- Search Results: morryde x~factor
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Shop: Replacement Spring for the 18K or 20K Curt Helux Coil-Spring Pin Box
- Q&A: Bearing Kit For Curt/Lippert 7,000 lb Trailer Axle
- Video: Detailed Breakdown of the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles
- Video: Installing the Dexter U-Bolt Kit on a 2018 Grand Design Reflection Fifth Wheel
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Bearing Kit - BK3-200
- Shop: MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications
- Shop: MORryde X-Factor Crossmember Adapter Kit for OEM Correct Track Hangers
- Shop: Trailer Wheel Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, GS-2125DL Seal
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Video: An In-Depth Look at the MORryde X-Factor Crossmember for Standard Frame Hangers
- Video: MORryde X-Factor Crossmember Adapter Kit for OEM Correct Track Hangers Feature Review
- Video: MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications Review
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
on Adjustable Trailer Coupler
Jerred H.
12/1/2025
Hey Ryan, were you able to measure the spindle on your Dexter 7K axles to see which bearing kit matched? Knowing which size worked could really help others trying to replace their bearings and seals on similar trailers.