Bearing Kit For Curt/Lippert 7,000 lb Trailer Axle

Updated 03/07/2025 | Published 06/15/2023

Question:

Can you tell me which bearing kit I need for below 7000 lbs Axle: CURT70-SBSA-90.5-74.5-NOSP-OS-L-C86537-ABS-7279-BRONZE-30PT Item# 2021127067 Cust Part# 120311

asked by: Michael A

Expert Reply:

Appreciate that info, and we do have the exact bearing kit you need for your Curt/Lippert 7,000 lb trailer axle. The correct kit is the following part number:

- Bearing Kit # BK3-200

expert reply by: Kyle S

Jim K.

3/7/2025

Kyle, I have the same axle assembly on my 2023 GD Solitude. I am looking for a brake assembly and hub/drum. My Solitude has ABS. I have looked at your standard brake assembly and it appears that it would work EXCEPT that it is missing the holes on the top to bolt on the ABS sensor. Similarly, your standard replacement drum would fit BUT it doesn’t have the ridges on the outside edge that work in conjunction with the previously mentioned ABS sensor. Can you recommend replacement assembly/hub/drum that will accommodate ABS system Thanks

Jon G.

3/7/2025

@JimK I actually just looked into this recently and we unfortunately don't have any hubs or brakes that will work with an ABS system. The best I could find was using our brake kit # AKEBRK-7-SA but modding the backing plate to accept an ABS sensor. Since you're also needing to replace the hub, I recommend finding a shop that can order a whole setup for you.