MORryde X-Factor Crossmember Adapter Kit for OEM Correct Track Hangers Feature Review Video

Jon, it actually looks like you'd be needing the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks #RM-2460-2580 instead. These are for 8k axles, which from my research, is what your 2020 Grand Design Momentum 320G has. This kit…

I definitely see what you're saying about the spacer, found as part #LC34UD, from the 2nd gen Correct Track LC407131. With that being said, the Correct Track Trailer Alignment and Lift Kit #RR23QX has been safety tested and works just fine…

The MORryde X-Factor Crossmember Adapter Kit for Correct Track Hangers part #MR93WR which is designed to be used with the MORryde X-Factor Crossmember for Standard Frame Hangers part #MR33WR is used on the outside hangers for trailer's with…

Thanks for reaching out! The MORryde X-Factor Crossmember for Stock Leaf Spring Suspension with Correct Track MR69ZR was discontinued back at the end of 2022 but you can piece it together using the MORryde X-Factor Crossmember for Standard Frame…

Yes, you are able to use the MORryde X-Factor Crossmember #MR33WR but on the Correct Track front and rear hangers you would also need the Adapter Kit #MR93WR. I do not see any plumbing or other components on your 2018 Highland Range Open Range 374BHS…

The MORryde X-Factor Dropdown Crossmember for Stock Leaf Spring Suspension item #MR84AR is going to shore up and support your Toy Hauler's frame like a sway bar on a vehicle. It will keep your trailer's suspension from buckling when making…

The Correct Track Trailer Alignment and Lift kit part #RR23QX that you referenced is compatible with the Road Armor equalizers to answer your first question Ryan. Since you have the Correct Track kit installed you would need the MORryde X-Factor…

MORryde states that their X-Factor crossmember part #MR84AR that you referenced can be installed on all of the hangers or even just a single one. Obviously if you install it on all hangers you get maximum results though. This is a unique product and…

7k Dexter axles are a little annoying as they can have two different seals with only difference being the inner diameter. If the seal has an inner diameter of 2.250 inch you'd want the part #GS-2250DL or if instead you had the spindle diameter as…

Between the 7K #RM-2460-2570 and 8K #RM-2460-2580 Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks I recommend going with the 7K for your 2018 Vilano 5th wheel. It will give you the best ride possible since it's designed to work with…

I can help you out with the right Comfort Ride system for your 2019 Grand Design Momentum 351M. What you have is a pair of 7,000 lb axles, so the system that will work for you is the following: - Roadmaster Comfort Ride Leaf Spring Suspension Kit w/…

The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2570 will not include wet bolts. This is due to the system using slipper springs to replace the double eye springs that come on most trailers. With the slipper springs…