How do Safety Chains Attach and Remove from Trailer Frame

Updated 02/03/2026 | Published 07/23/2024

Products Featured in This Question

24" Long Safety Chain with 1/4" S-Hook - 5,000 lbs - Qty 1

(94)

$13.55

Laclede Chain 3/8" Quick Link - 1/2" Opening - 2,200 lbs Working Load Limit - Qty 1

(32)

$10.84

Question:

I damaged the retaining hook on my trailer chain. It is a closed system on each end, so how can I replace either the hook or entire chain? Do I need to cut it off, then replace it with something that has a hook on either end? If so- I am looking for a 24inch chain made in the USA, with two hooks. Any recommendations? Attaching pics so you can see my dilemma. Thanks!

asked by: Tim

Safety Chain Trailer Frame Loop
(click to enlarge)

Expert Reply:

Hey Tim, yes you are going to need to cut off the old chain or cut off the loop that is welded to the trailer frame so you can install a new 24 inch safety chain like the part # TCTSCG30-724-03x1. I would cut the chain though so that you can reuse the loop on your frame.

Then you can use a quick link like the part # 6590-044-04 to attach the chain to the loop.

expert reply by: Jameson C

Jameson C.

2/3/2026

Hey Tim, how did things go after you cut the old chain and added the new 24-inch safety chain with the quick link? Your update could make it easier for the next person dealing with a welded loop setup.