Replacement Parts for EZ Loader Boat Trailer

Updated 09/06/2025 | Published 09/03/2025

Products Featured in This Question

Replacement Trailer Hub Bearing - L68149

(2189)

$19.67

Double Lip Seal for 3,700-lb Marine Hubs

(197)

$19.67

CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased

(289)

$71.03

etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles - 26-1/4" - Dacromet

(58)

$83.13

Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs - Oil

(22)

$579.33

Replacement Trailer Hub Bearing - L44649

(2189)

$23.90

Question:

This E-Mail is intended for Robin H. Hello Robin am having difficulty opening a response window to our conversation. When I click on REPLY it switches to close and does not open a window Will try to attach here. I would also like to order bearings and seals as well if those parts are avail from you as well. I know I could just order from EZ=Loader but I have been dealing with E-Trailer for years! Again Thank you for all your help Steve

asked by: Steve R

EZ Loader Parts Diagram
(click to enlarge)

Expert Reply:

Hello again Steve; sorry for the trouble, sometimes our system doesn't play nice with pictures. I'm not seeing any calipers or rotors in the parts diagram there, only standard idler hubs. I can tell you that the bearings are # L68149 and # L44649 with the # 168255TB grease seal.

If you're wanting to completely replace the disc brakes the exact part doesn't really matter as much. The Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 # KOD77FR will work as an oil bath replacement and come with the bearings you need. You will still need the # 168255TB since your seal ID is slightly smaller than the one included with the kit. I think that covers everything but if you need anything else don't hesitate to reach out below just like before.

expert reply by: Robin H

Steve R.

9/6/2025

THANK YOU!!!!! I appreciate your help and will be placing order soon, again THANK YOU!!!! Steve

Robin H.

9/6/2025

@SteveR you're welcome, happy to help!

Robin H.

9/6/2025

Hate to keep bothering you, just hate to get the wrong parts. I did a search on the spring part #250-031411 and came up with part #E33SR which says for a 4300# axle, does that seem right? Also do you have a recommendation for new idler hub for front axle as I am only putting brakes on rear axel? Thank you in advance for your help! Steve

Robin H.

9/6/2025

@SteveR don't worry about it, parts get complicated and it is easy to get the wrong thing. I would rather get you the right parts the first time too. That EZ loader spring is a 26-1/4" C-hook rated for a 3,950 lb axle. The # e33SR has a slightly higher rating but it won't be enough to impact ride quality so it is a good replacement. You can use the # CE13515 for an idler hub and then swap out the grease seal for # 168255TB. Unfortunately, none of the hubs are going to come with that particular seal so you will need to order it separately and trade it out no matter which one you get.

Robin H.

9/6/2025

I feel bad you are working on a Saturday, but I am sure glade your helping me so much!! THANK YOU Steve

Robin H.

9/6/2025

@RobinH you're welcome.