Replacement Bolt-On Disc Brake Actuator for Tie Down 70E
Question:
Im looking to replace my Tie Down 70E disc actuator. Do you offer a replacement that would allow me to use the same holes on the trailer for mounting? It uses three mounting bolts, see below pic. I would like to avoid drilling new holes and cutting the trailer if it all possible. Thanks
asked by: Mike Y
Expert Reply:
There is a replacement that I recommend for the Tie Down 70E disc brake actuator, though you will want to verify that your mounting bolt holes are 3 inches apart on center and your tongue is a 3 inch channel.
If they are I recommend the Dexter DX7.5 Drop-N-Go Brake Actuator # 099-175-20.
This actuator has a 7,500 lb capacity, couples to a 2 inch hitch ball, and is designed for use with disc brakes like you need. I have added a link to a video review for you to check out as well.
Product Page this Question was Asked From
Dexter DX7.5 Drop-N-Go Brake Actuator - Disc Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Brake Actuator
- Surge Brake Actuator
- Agricultural
- Construction
- Marine
- Travel Trailer
- Utility Trailer
- Bolt-On
- 7500 lbs GTW
- 2 Inch Ball Coupler
- Disc Brakes
- Electric Lockout
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Dexter DX7.5 Drop-N-Go Brake Actuator - Disc Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Video: Feature Review Dexter DX7.5 Drop-N-Go Brake Actuator
- Q&A: Tie Down Model 70 Surge Brake Actuator Replacement Recommendation
- Shop: Kodiak Hydraulic Brake Line Kit - Single Axle - 18'
- Shop: Dexter Premier Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Roof Rack
- Shop: etrailer E Track Tie-Down Anchor with 3/8" Hole - 1,333 lbs - Qty 1
- Shop: Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized Steel
- Shop: Demco Straight Tongue Trailer Coupler - eZ-Latch - Zinc - 2" Ball - Bolt On - 10,000 lbs
- Shop: Trailer Wiring
- Shop: Aluminum Sendel Series T02 Machined Trailer Wheel - 14" x 5-1/2" Rim - 5 on 4-1/2
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Troubleshooting Kodiak Brake Line Brass Tee Fitting Leaking
- Video: Review of the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout
- Article: Most Popular Wheel Bearings
- Video: Checking Out the Aluminum AM03 Series Black Machined Trailer Wheel
- Shop: Trailer Hitch
- Search Results: grease seals
- Search Results: brake actuator
- Q&A: Replacement Actuator for Trailer with Model 70 Disc Brake Kit
- Q&A: Correct Rebuild Kit for Kodiak 225 Calipers
- Search Results: surge brake actuator
- Q&A: Replacement Hub for Tie Down Engineering 11033
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Video: What to Know About the Demco Hydraulic Brake Actuator w/ Electric Lockout
- Video: Checking Out the Demco Hydraulic Brake Actuator w/ Electric Lockout
- Video: Detailed Breakdown of the DeeMaxx Trailer Idler Hub for 3,500-lb Axles
- Video: Breaking Down the Kodiak Trailer Hub for 3,500-lb Axles
- Search Results: trailer tires
- Article: Parts Required to Add Electric Over Hydraulic Drum Brakes to a Trailer
on Straight Tongue Trailer Coupler
