Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
7-3/4" Long curved equalizer connects double-eye springs on tandem- or triple-axle trailers and allows for enough movement between the axles to keep the ride smooth and the load undisturbed. Center bolt hole is 9/16" in diameter.
Features:
Specs:
Good stuff and great service
Looks great will work perfect
Item arrived very fast. I am very satisfied.
Perfect fit could not ask for anything better.
Looking forward to being rid of the squeeks the trailer makes, being able to grees all the joints should greately increase the life of the components involved.
As usual etrailer came through. They gave easy measuring instructions and these parts matched perfect. The equalizers gave new life to my suspension. I only wish I had bought the whole equalizer kit. Even during the holidays when I ordered they shipped super fast.
This was a perfect replacement to the OEM equalizers on my trailer. The only negative is that it comes with nylon bushings. The original nylon bushings on my trailer were completely shot after about 20,000 miles, so I would not replace nylon with nylon. It would be great if these replacement equalizers came with bronze bushings, but since they don't, spend the extra money and replace the nylon bushings with bronze.
Exact item I needed as a replacement. Super fast shipping
These were a direct replacement for my 25 year old dump trailer. I removed the plastic bushings and used brass.
I knew my shackles where worn but like most people, I put off changing them until one broke. I did buy the HD Dexter shackle kit about 6-12 months before installing it. I bought the wrong shackle kit with too small equalizers. I ordered this to get the job finished up. I only gave them a 4 star rating because they were definitely not as heavy as the Dexter units--Dexter had grease fits and bronze bushings. This unit had no grease fittings and what looked like plastic bushings.
With that said, These units worked just fine.
Hauled 5k lbs with them so far.
We will see what the test of time says.
The bolt holes are not bored center of the lobes and are not 90 degrees to the stock. The egg shaped equalizers I am replacing have more material remaining on the thin side than the new ones I just received from etrailer. NOT HAPPY Must Resolve This Issue ASAP
Just what i needed since my original equalizers were completely worn out .
John
9/8/2023
Holding up well !
Mike L.
11/1/2023
My old trailer had some play in the suspension and visibly worn parts so I just ordered every thing except for the axles them selves. Glad I did too. Here are some pics of the old parts and new.
Looks as good or better than what I had. We will see how they hold up. I paired them with a new heavy duty set of shackles . Don't think I'll have a problem for a long time now!
This product looks identical to the one that came off of my 1992 trailer. The original piece is stamped Brazil, the new one is stamped China. Time will tell how it holds up, but install was no issue.
Ordered curved equalizer, shackles, bushings, bolts with grease zerk, to fix my son-inlaws trailer and this was my first time to order from here. The order was simple and the service and updates were very prompt with my order shipping the same day and received it in 2 days.Parts looked great and fit great so I couldn't be more pleased with my order from start to finish.If someone needs trailer parts this is the place to go.Thank you etrailer for making my job easy.
Dennis A.
Dennis A.
10/8/2014
Still holding-up great with no issues.
Easy to navigate website for ordering.
I worked with Laura on replacement shackles, equalizer and bolts with grease fittings. Unfortunately there wasn't a kit that had the combination of equalizer length and shackle length but Laura was very helpful in working through the options.
The products arrived on time, as promised and after the normal cussing and fussing to get the old stuff off, they fit well. The second side went much faster than the first side, go figure. . .
I was pleased with the combination of price and service. I would probably be willing to pay more for US made products but that's the only reason I didn't give the highest rating. Service was great and I recommend calling if you aren't absolutely sure you know what you need.
Bill L.
5/3/2014
The shackles and equalizers are still there and working well. One grease fitting came out of a bolt yesterday which was a bit annoying as they are just pressed in, not a threaded fitting. I may tap the bolt for a screw in fitting as the press in came out in my grease gun after greasing. Everything else has worked well.
1 star
These bushings have entirely to much slop
About .030 worth
If my original shackles weren’t busted I would have returned this rebuild kit
As for the curved equalizer 1 star as well
Much thinner castings that my “stock” original parts
And the bushing holes are machined crooked and off center
E-trailer doesn’t want comments on their shipping but my orders in the last couple years has been extremely unreliable
I will probably never use this company again
Direct fit and replacement. I replaced the fiber bushings with the brass ones that came with the suspension upgrade kit that I ordered with the 2 equalizers.
Robert
3/13/2023
Still quiet and holding up well.
These equalizers were needed to allow me to install new slightly shorter and heavier duty springs under my pontoon boat trailer. They are doing what they are intended to do in fine fashion.
I was VERY pleased with everything. Unbelievably quick shipping . Everything went together as it should. I have already referred etrailer to others and I will most certainly purchase from them again
Harry L.
12/31/2018
still very happy with everything I purchased and would certainly come back to Etrailer in the future for my trailer needs. Thanks
High quality appears to be stronger than the original from the factory.
Not happy! Quality is very poor! Comes with nylon bushings! No grease zert! Not what I thought I was ordering! Looks like it was drilled and oversize bushings put in it to reduce down so nylon bushings would fit! I will not order any other products from etrailer!!!
Mike L.
3/13/2019
The photos in the product description show nylon bushings. The equalizer wouldnt typically have a grease zerk, youd want to use a wet bolt like # 126B2.
Helpful Links
After suffering a major incident on the highway where 3 of the 4 tires were destroyed along with the rims and some suspension parts, I needed parts fast and correct for my trailer. These wheels, along with the other suspension parts, where inexpensive, well built, accurately described, delivered quickly, and exactly what I needed to get my trailer back up and in operating condition again.
Do you have a question about this Trailer Suspension Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Victoria H.
3/13/2025
I'm happy to hear we had what you needed to get your dump trailer some much needed upgrades, Garret.