Which MORryde StepAbove RV Folding Step Fits STP-3-26-29

Question

Question:

the sticker on my stairs is WO:ss12804 STP-3-26-29 I am l ooking for the right removable stair mounting plate,

asked by: Dennis

0

Expert Reply:

Hey Dennis, since your MORryde StepAbove is for 26 inch wide door ways the correct replacement mounting plate would be the part # MR32AR. Did yours break or did you misplace it?

expert reply by: Jameson C

0

Dennis

8/24/2025

I am trying to chande from the strut assist, steps to the plain removable step plate.

Answer 1

Congrats on the new camper, Eric! Before I can confirm which parts are compatible with your step, I’ll need to know which model and generation of MORryde StepAbove you have. MORryde has made a few different generations of these steps over the years,…

view full answer...

Answer 2

The Removable Mounting Plate for MORryde StepAbove RV Steps #MR32AR does not come with mounting hardware as not every application will require the same hardware for the best install. You'd need to look at your application with the bracket and…

view full answer...

Answer 3

Yes, the MORryde StepAbove RV Steps with Strut Assist like #MR85RR can use the removable mounting plate. It isn't compatible with the struts but you already plan to remove them so that won't be an issue. Assuming you have a 26-28" wide…

view full answer...

Answer 4

The Removable Mounting Plate for MORryde StepAbove RV Steps part #MR32AR is designed for the first generation MORryde StepAbove steps. The flat plate gets drilled into the floor and then the corner brackets bolt to the steps with the included…

view full answer...

Answer 5

I spoke to MORryde about your steps and they informed me that you could convert to a removeable mounting plate by getting rid of the strut assist and you would then just need the Replacement Step Latch for MORryde Step Above RV Steps part #MR97BR and…

view full answer...

Answer 6

If you already tested the outlet and are receiving power and the fuse is good inside of your monitor cord and the monitor still will not turn on then you will need to replace the monitor as something internal must be wrong with the monitor. You can…

view full answer...

Answer 7

You will want to look at the legs of your steps to determine which MORryde steps you have. If your MORryde steps have a pull pin then you've got the 1st generation. If you have a button that releases the legs for adjustment, you have the second…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Hello Joe, Thank you for reaching out! The Power Mountain Tallboy Off-Road Bottle Jack - 11-5/16" to 27-1/16" Lift - 12 Tons #PM94FR does have the capacity you’d need, but since your fifth wheel’s frame sits about 25" off the ground,…

view full answer...

Answer 11

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 12

Hey Dave, welcome back! The only front hitch that fits the diesel models is the EcoHitch Hidden Front Mount Trailer Hitch #EH37FR. Installation will require some trimming. You can see what it's like in the installation video linked further down…

view full answer...

Which MORryde StepAbove RV Folding Step Fits STP-3-26-29

Product Page this Question was Asked From

Continue Researching