Front Camper Tie Downs For A 2015 Ford F250

Question

Question:

hi, I have a 2015 ford f250 super duty. I am interested in purchasing only the front torklift frame mount tie downs. however, I can only find a product where it includes the back mounted tie-downs. do you sell only the front ones?

asked by: Peter S

0

Expert Reply:

Hi Peter!

I can definitely get you the front tie downs for your 2015 Ford F250. You didn't mention your bed size or if you had running boards, so I have those options listed below.

6-3/4 Foot Bed - no running boards or cab length only boards:
-TorkLift Camper Tie-Downs - Custom Frame Mount - Front # TLF2012

6-3/4 Foot Bed - wheel-to-wheel running boards:
-HappiJac Camper Tie-Downs - Custom Bed and Bumper Mount - Front and Rear # LC182910-182971

8 Foot Bed - no running boards or cab length only boards:
-TorkLift Camper Tie-Downs - Custom Frame Mount - Front # TLF2016

8 Foot Bed - wheel-to-wheel running boards:
-HappiJac Camper Tie-Downs - Custom Bed and Bumper Mount - Front and Rear # LC182910-182971

There are no TorkLift options if you have the wheel to wheel running boards, so I figured I would mention the Happijac option in case you needed. We also have both the TorkLift options in aluminum with # TLF2012A and # TLF2016A respectively.

What kind of camper will you be loading? And, do you already have turnbuckles?

expert reply by: Lazer S

0

Peter S.

8/15/2025

sick! thanks lazer! exactly what I'm looking for

Lazer S.

8/18/2025

@PeterS You're welcome! Let me know if there is anything else I can help with!

Answer 1

If it is a 1500 with standard bed, it is rated to tow 5,100 lbs. If it is a long bed then 4,900 lbs. These ratings are based on model year, regular cab, 4WD, engine size, and that truck has the 4.30:1 axle ratio. You may be further restricted by your…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Hello Dan, Welcome to etrailer. I am really glad you found us! First off, congrats on the North Point!! You are absolutely right to question the salesperson’s recommendation. Unfortunately, some dealers focus more on moving units than on making sure…

view full answer...

Answer 9

Hey Kyle. Unless you're driving around with 1,500 lbs of gear in the bed of your 2025 Ford F-250, the Air Lift LoadLifter 5000 Ultimate Air Helper Springs item #AL29DQ are not going to be overloaded. Your 5th wheel hitch and a full tank of fuel…

view full answer...

Answer 10

Hey, Ron! I've got just the rails you need! B&W Custom Installation Kit part #BWRVK2401. This kit will come with the rails, frame brackets, and all the hardware needed for the install. Since this is a custom kit you will not have to do any…

view full answer...

Answer 11

Hey Eric, The hitch extenders that we currently offer for a 2-1/2" receiver tube opening unfortunately max out at 6,000lbs GTW and wouldn't be capable of towing the trailer. You're most likely going to need to upgrade to a TorkLift…

view full answer...

Answer 12

Hey Cindy, thanks for reaching out. We may have an extension that will work for you. It will help to know exactly how long of an extension you are needing as this will be one of the main deciding factors. Let me know how long you need it to be in the…

view full answer...

Front Camper Tie Downs For A 2015 Ford F250

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching