Availability Of Replacement For Ventline L9144 Tank Monitor

Question

Question:

I have a 2004 Arctic Fox that is wired for a ventline L9144 tank monitor which has failed and I would like to know if there is a compatible replacement for this tank monitor? I really dont want to rip the belly pan off this thing to add new tank sensor if I can get away with just changing the monitor panel. Thanks in advance,

asked by: Richard V

0

Expert Reply:

Hello Richard, thanks for reaching out. I am sorry to say that we do not offer a replacement for the Ventline L9144 tank monitor. Even looking around elsewhere online it looks like this monitor is not something that is readily available and may be obsolete. The only solution I can offer you here would be a whole new tank monitoring system like the SeeLeveL RV Holding Tank Monitoring System # SE49VR.

expert reply by: Jesse M

0

SE49VR
(click to enlarge)

Jesse M.

8/15/2025

Hey Richard, did you decide to go with the SeeLeveL RV Holding Tank Monitoring System? I'm curious to know if it worked out for you, as it might help others in a similar situation. Let me know if you need any more assistance!

Answer 1

For your 2010 Dodge Ram 3500 you're going to have a couple of options to choose from. - If you have a crew-cab 4x4 with a single rear wheel and a 6-1/2' bed then you're going to need the TorkLift Custom Frame-Mounted Camper Tie-Downs…

view full answer...

Answer 2

Thanks for the information! What you're looking for is called a Northwood Manufacturing 6-pin plug. The only thing we have that would work is the 6-Pole Square Trailer Wiring Connector Kit item #37995. We do not have the one with the flat…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Availability Of Replacement For Ventline L9144 Tank Monitor

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching