Trailer Hitch and Wiring that Fits 2025 Kia Carnival Hybrid

Question

Question:

Looking for a tow package hitch and Wiring for my 2025 Kia Carnival Hybrid July 2024 manufacture. Seems like there are no options for the Hybrid built before Aug 2024-at least from the wiring side of things.

asked by: George P

0

Expert Reply:

Hey George, for your 2025 Kia Carnival Hybrid the Curt hitch part # C67ER is a confirmed fit and will work great.

Then for trailer wiring you would want the Curt # C63RV which definitely works as long as you have LED taillights. Since your vehicle is a hybrid you'd definitely have LED taillights. What are you planning on towing?

expert reply by: Jameson C

0

George

7/17/2025

We are thinking of getting a NuCamp TAB 320 lite trailer and towing with our 2025 Kia Carnival Hybrid if we can get the Kia setup (trailer hitch + wiring)

George

7/17/2025

Also, forgot to ask. The NuCamp TAB 320 has brakes & requires a 7 pin connector

Jameson C.

7/17/2025

@George Nice!

Jameson C.

7/17/2025

@George So in addition to what I mentioned you will need a brake controller and a 7-way trailer wiring kit. For that the P3 part # 90195 is a really great option for a brake controller and then to convert the 4-way to a 7-way you'd also need the part # ETBC7 which comes with everything needed to install a brake controller as well.

Answer 1

No, I do not Paul and I doubt Curt or Draw-Tite make anything other than a 4-way for the hybrid model. Aftermarket wiring harnesses for vans are typically limited to 4-way connectors like the item #C63RV for LED lights or the item #C32MJ for…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Trailer Hitch and Wiring that Fits 2025 Kia Carnival Hybrid

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching