Curt 7-Way to RV Socket LED Circuit Tester Review Video

For a ball mount with a 1" shank hole similar to item #C45310 you will want the Curt Ball Mount for 2" Hitches item #D-4. This ball mount has a 3/4" rise, a 2" drop, and extends out slightly farther at 10-1/4" long.

I would be happy to confirm the parts you referenced fit your 2019 Chevy Colorado and are compatible together. I have listed them below, along with any changes, and attached installation videos. Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar…

Hey Anthony, it's pretty odd but the Curt tow bar wiring kit part #C59HR does not come with a mounting bracket for the 6-way so you would need to also go with the part #C92CR to mount it to the bottom edge of your front bumper.

With your 1994 Coleman Fleetwood Four Seasons Yosemite having 10" wheels and looking to weight 1,850 pounds, from what I could find out, you will have either a 2,000 pound axle, or a 2,200 pound axle. This will mean you either have a spindle…

Since your hubs have inner and outer bearing numbers L44649 the correct bearing kit you would need is the part #BK1-150. I attached a trailer bearing install video for you to check out as well. For the standard spindle you would use the TruRyde…

The 7-way connector part #HM20048 can work for you but it depends on what type of umbilical coiled adapter you have or plan to go with. Basically Reggie with this installed you'll need to have a 7-way to 6-way round coiled adapter like the part…

Thanks so much for the photos they were super helpful. What they show is that you have the MORryde LRE suspension with the shear spring, and the part number you mentioned confirmed that as well. We do have the correct upgrade kit for your camper,…

If the trailer you are planning on towing has LED lights, the adapter you can use is part #C35FR. This adapter is needed because you have a bulb-out sensor on your Cayenne. When you use a trailer with LEDs, they draw so little power and cause the…

I recommend the etrailer Trailer Hitch Receiver #e23ZR for your 2021 Toyota RAV4. This receiver is our easiest to install as it bolts to the existing weld nuts that are already in the frame rails of your RAV4. The receiver is painted in a matte black…

The trailer brake output or blue wire is not connected on a 4 to 7-way adapter like the 4 to 7-Way with 4-Way Adapter part #ETBC7L when using a wireless trailer brake controller like the Curt Echo Wireless Brake Controller part #C51180. The two four…

Those are the wires for the brake magnets. You will need to connect the black wire to the brake controller output wire on your trailer connector and you are correct the white wire will need to be grounded to a clean metal surface on the trailer. I…

Actually, for the Echo brake controller, you'll really only need the #ETBC7L kit, but the #ETBC7 kit you have will certainly work. You just won't need all the included parts. To install the Curt #C51180 Echo wireless brake controller,…