Does Thermostat of Furrion Chill Cube AC Unit Work with Furnace

Question

Question:

I have a 2012 surveyor with a suburban furnace. Im wondering if you can confirm whether this will work with the suburban unit?

asked by: Doug

0

Expert Reply:

Hey Doug, yes the Furrion Chill Cube # FR49TD thermostat does work with your furnace. We have confirmed this with Furrion in the past. How do you like the Suburban furnace?

expert reply by: Jameson C

0

Jameson C.

8/7/2025

Hey Doug, I'm curious to know if the Furrion Chill Cube thermostat worked well with your Suburban furnace. Your experience could really help others in a similar situation!

Answer 1

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 2

Hey Neil. The 18,000 Btu Furrion Chill Cube RV Air Conditioner item #LC34DX fits a 14-1/4" x 14-1/4" cutout which is pretty standard on RV's. If you meant to write Dometic instead of domestic then yes it'll fit in your existing…

view full answer...

Answer 3

There is indeed a suitable replacement. The Fulton 1588S00 was replaced by the #F501115 which we carry. They are sold in a quantity of 2.

view full answer...

Answer 4

Hi JD; the Furrion Chill Cube #FR49TD air distribution box has a vent on it you can open and close. See the picture attached below. When it is closed it forces more of the air through the ducted system. Assuming you have a ducted system you will need…

view full answer...

Answer 5

Hello Nathan , Looking to switch to the Furrion 18K, great choice! This year, new regulations were introduced for RV air conditioners, requiring a change from R-410A to R-32 refrigerant. This change helps reduce environmental impact and improves…

view full answer...

Answer 6

Hi Leah; you won't have to run new wiring but it isn't as simple as plug and play. The thermostat and air distribution box will have to be changed for both of your existing AC units. All of the old systems are set up for R410A refrigerant so…

view full answer...

Answer 7

The B and W Companion hitch part #BWRVK3305 that you referenced weighs 159 lbs. The head is easily removed to make the install and removal of the hitch easier as well since it splits the weight up. The head weighs 71 lbs.

view full answer...

Answer 8

The shipping weight of the B&W Companion OEM 5th Wheel Hitch #BWRVK3305 is 152 lbs so it will be just under that after you remove the packaging. Although it is still pretty hefty, the head unit part #BWRVC3006 can easily be removed off of the…

view full answer...

Answer 9

The photo of the AC nameplate didn't come through but that's okay, as based on the model number I was able to verify with Dometic the correct replacement shroud for your Dometic 457915 AC, which is the following: - Replacement Shroud…

view full answer...

Answer 10

Changing the positioning of the support arms that hold the head of the B&W Companion #BWRVK3300 will shift the pin weight of the trailer. Ideally you will want to keep the king pin centered over the rear axle of the truck or slightly forward of…

view full answer...

Answer 11

Hey Daniel, the new Furrion Chill Cube #FR39TD is so new I doubt its in any top 10 list you'll find online but it honestly would win. It's quieter and blows colder while also has a really cool feature where you can make the remote control the…

view full answer...

Answer 12

Hey Lauren, the Furrion Chill Cube part #FR39TD will be a really nice upgrade over the Dometic that you have now. It will blow a lot colder and be a lot quieter as well as be more efficient with power consumption. To control a furnace you will need…

view full answer...

Does Thermostat of Furrion Chill Cube AC Unit Work with Furnace

Product Page this Question was Asked From

Continue Researching